You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
1902 lines
122 KiB
1902 lines
122 KiB
/* Define for CH583 */
|
|
/* Website: http://wch.cn */
|
|
/* Email: tech@wch.cn */
|
|
/* Author: W.ch 2020.05 */
|
|
/* V0.2 SpecialFunctionRegister */
|
|
|
|
// multi-blocks: __BASE_TYPE__, __CH583SFR_H__, __CH583USBSFR_H__, __USB_TYPE__...
|
|
|
|
#ifndef __BASE_TYPE__
|
|
#define __BASE_TYPE__
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* ********************************************************************************************************************* */
|
|
/* Base types & constants */
|
|
|
|
#ifndef TRUE
|
|
#define TRUE 1
|
|
#define FALSE 0
|
|
#endif
|
|
#ifndef NULL
|
|
#define NULL 0
|
|
#endif
|
|
|
|
#ifndef VOID
|
|
#define VOID void
|
|
#endif
|
|
#ifndef CONST
|
|
#define CONST const
|
|
#endif
|
|
#ifndef BOOL
|
|
typedef unsigned char BOOL;
|
|
#endif
|
|
#ifndef BOOLEAN
|
|
typedef unsigned char BOOLEAN;
|
|
#endif
|
|
#ifndef CHAR
|
|
typedef char CHAR;
|
|
#endif
|
|
#ifndef INT8
|
|
typedef char INT8;
|
|
#endif
|
|
#ifndef INT16
|
|
typedef short INT16;
|
|
#endif
|
|
#ifndef INT32
|
|
typedef long INT32;
|
|
#endif
|
|
#ifndef UINT8
|
|
typedef unsigned char UINT8;
|
|
#endif
|
|
#ifndef UINT16
|
|
typedef unsigned short UINT16;
|
|
#endif
|
|
#ifndef UINT32
|
|
typedef unsigned long UINT32;
|
|
#endif
|
|
#ifndef UINT64
|
|
typedef unsigned long long UINT64;
|
|
#endif
|
|
#ifndef UINT8V
|
|
typedef unsigned char volatile UINT8V;
|
|
#endif
|
|
#ifndef UINT16V
|
|
typedef unsigned short volatile UINT16V;
|
|
#endif
|
|
#ifndef UINT32V
|
|
typedef unsigned long volatile UINT32V;
|
|
#endif
|
|
#ifndef UINT64V
|
|
typedef unsigned long long volatile UINT64V;
|
|
#endif
|
|
|
|
#ifndef PVOID
|
|
typedef void *PVOID;
|
|
#endif
|
|
#ifndef PCHAR
|
|
typedef char *PCHAR;
|
|
#endif
|
|
#ifndef PCHAR
|
|
typedef const char *PCCHAR;
|
|
#endif
|
|
#ifndef PINT8
|
|
typedef char *PINT8;
|
|
#endif
|
|
#ifndef PINT16
|
|
typedef short *PINT16;
|
|
#endif
|
|
#ifndef PINT32
|
|
typedef long *PINT32;
|
|
#endif
|
|
#ifndef PUINT8
|
|
typedef unsigned char *PUINT8;
|
|
#endif
|
|
#ifndef PUINT16
|
|
typedef unsigned short *PUINT16;
|
|
#endif
|
|
#ifndef PUINT32
|
|
typedef unsigned long *PUINT32;
|
|
#endif
|
|
#ifndef PUINT8V
|
|
typedef volatile unsigned char *PUINT8V;
|
|
#endif
|
|
#ifndef PUINT16V
|
|
typedef volatile unsigned short *PUINT16V;
|
|
#endif
|
|
#ifndef PUINT32V
|
|
typedef volatile unsigned long *PUINT32V;
|
|
#endif
|
|
#ifndef PUINT64V
|
|
typedef volatile unsigned long long *PUINT64V;
|
|
#endif
|
|
|
|
/* ********************************************************************************************************************* */
|
|
/* Base macros */
|
|
|
|
#ifndef min
|
|
#define min(a,b) (((a) < (b)) ? (a) : (b))
|
|
#endif
|
|
#ifndef max
|
|
#define max(a,b) (((a) > (b)) ? (a) : (b))
|
|
#endif
|
|
|
|
#ifdef DEBUG
|
|
#define PRINT(X...) printf(X)
|
|
#else
|
|
#define PRINT(X...)
|
|
#endif
|
|
|
|
/* Calculate the byte offset of a field in a structure of type */
|
|
#define FIELD_OFFSET(Type, Field) ((UINT16)&(((Type *)0)->Field))
|
|
|
|
/* Calculate the size of a field in a structure of type */
|
|
#define FIELD_SIZE(Type, Field) (sizeof(((Type *)0)->Field))
|
|
|
|
/* An expression that yields the type of a field in a struct */
|
|
#define FIELD_TYPE(Type, Field) (((Type *)0)->Field)
|
|
|
|
/* Return the number of elements in a statically sized array */
|
|
#define NUMBER_OF(Array) (sizeof(Array)/sizeof((Array)[0]))
|
|
#define NUMBER_OF_FIELD(Type, Field) (NUMBER_OF(FIELD_TYPE(Type, Field)))
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif // __BASE_TYPE__
|
|
|
|
|
|
#ifndef __CH583SFR_H__
|
|
#define __CH583SFR_H__
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/* ********************************************************************************************************************* */
|
|
|
|
// Address Space
|
|
// CODE: 00000000H - 0007FFFFH 512K
|
|
// DATA: 20000000H - 20007FFFH 32KB
|
|
// SFR: 40000000H - 4000FFFFH 64KB
|
|
//
|
|
// SFR: 40000000H - 4000FFFFH, 64KB
|
|
// SYS: +1000H - 1BFFH, include base configuration, interrupt, GPIO, etc...
|
|
// TMR0: +2000H - 23FFH
|
|
// TMR1: +2400H - 27FFH
|
|
// TMR2: +2800H - 2BFFH
|
|
// TMR3: +2C00H - 2FFFH
|
|
// UART0: +3000H - 33FFH
|
|
// UART1: +3400H - 37FFH
|
|
// UART2: +3800H - 3BFFH
|
|
// UART3: +3C00H - 3FFFH
|
|
// SPI0: +4000H - 43FFH
|
|
// SPI1: +4400H - 47FFH
|
|
// I2C: +4800H - 4BFFH
|
|
// PWMx: +5000H - 53FFH
|
|
// USB: +8000H - 83FFH
|
|
// USB2: +8400H - 87FFH
|
|
// BLE: +C000H - D3FFH
|
|
|
|
// Register Bit Attribute / Bit Access Type
|
|
// RF: Read only for Fixed value
|
|
// RO: Read Only (internal change)
|
|
// RZ: Read only with auto clear Zero
|
|
// WO: Write Only (read zero or different)
|
|
// WA: Write only under safe Accessing mode (read zero or different)
|
|
// WZ: Write only with auto clear Zero
|
|
// RW: Read / Write
|
|
// RWA: Read / Write under safe Accessing mode
|
|
// RW1: Read / Write 1 to Clear
|
|
|
|
/* Register name rule:
|
|
R32_* for 32 bits register (UINT32,ULONG)
|
|
R16_* for 16 bits register (UINT16,USHORT)
|
|
R8_* for 8 bits register (UINT8,UCHAR)
|
|
RB_* for bit or bit mask of 8 bit register
|
|
BA_* for base address point
|
|
b* for GPIO bit mask
|
|
Others for register address offset */
|
|
|
|
/* ********************************************************************************************************************* */
|
|
|
|
/* System: safe accessing register */
|
|
#define R32_SAFE_ACCESS (*((PUINT32V)0x40001040)) // RW, safe accessing
|
|
#define R8_SAFE_ACCESS_SIG (*((PUINT8V)0x40001040)) // WO, safe accessing sign register, must write SAFE_ACCESS_SIG1 then SAFE_ACCESS_SIG2 to enter safe accessing mode
|
|
#define RB_SAFE_ACC_MODE 0x03 // RO, current safe accessing mode: 11=safe/unlocked (SAM), other=locked (00..01..10..11)
|
|
#define RB_SAFE_ACC_ACT 0x08 // RO, indicate safe accessing status now: 0=locked, read only, 1=safe/unlocked (SAM), write enabled
|
|
#define RB_SAFE_ACC_TIMER 0x70 // RO, safe accessing timer bit mask (16*clock number)
|
|
#define SAFE_ACCESS_SIG1 0x57 // WO: safe accessing sign value step 1
|
|
#define SAFE_ACCESS_SIG2 0xA8 // WO: safe accessing sign value step 2
|
|
#define SAFE_ACCESS_SIG0 0x00 // WO: safe accessing sign value for disable
|
|
#define R8_CHIP_ID (*((PUINT8V)0x40001041)) // RF, chip ID register, always is ID_CH58*
|
|
#define R8_SAFE_ACCESS_ID (*((PUINT8V)0x40001042)) // RF, safe accessing ID register, always 0x0C
|
|
#define R8_WDOG_COUNT (*((PUINT8V)0x40001043)) // RW, watch-dog count, count by clock frequency Fsys/131072
|
|
|
|
/* System: global configuration register */
|
|
#define R32_GLOBAL_CONFIG (*((PUINT32V)0x40001044)) // RW, global configuration
|
|
#define R8_RESET_STATUS (*((PUINT8V)0x40001044)) // RO, reset status
|
|
#define RB_RESET_FLAG 0x07 // RO: recent reset flag
|
|
#define RST_FLAG_SW 0x00
|
|
#define RST_FLAG_RPOR 0x01
|
|
#define RST_FLAG_WTR 0x02
|
|
#define RST_FLAG_MR 0x03
|
|
//#define RST_FLAG_GPWSM 0x04 // RO, power on reset flag during sleep/shutdown: 0=no power on reset during sleep/shutdown, 1=power on reset occurred during sleep/shutdown
|
|
#define RST_FLAG_GPWSM 0x05
|
|
// RB_RESET_FLAG: recent reset flag
|
|
// 000 - SR, software reset, by RB_SOFTWARE_RESET=1 @RB_WDOG_RST_EN=0
|
|
// 001 - RPOR, real power on reset
|
|
// 010 - WTR, watch-dog timer-out reset
|
|
// 011 - MR, external manual reset by RST pin input low
|
|
// 101 - GRWSM, global reset by waking under shutdown mode
|
|
// 1?? - LRW, power on reset occurred during sleep
|
|
#define R8_GLOB_ROM_CFG R8_RESET_STATUS // RWA, flash ROM configuration, SAM
|
|
#define RB_ROM_CODE_OFS 0x10 // RWA, code offset address selection in Flash ROM: 0=start address 0x000000, 1=start address 0x040000
|
|
#define RB_ROM_CTRL_EN 0x20 // RWA, enable flash ROM control interface enable: 0=disable access, 1=enable access control register
|
|
#define RB_ROM_DATA_WE 0x40 // RWA, enable flash ROM data & code area being erase/write: 0=all writing protect, 1=enable data area program and erase
|
|
#define RB_ROM_CODE_WE 0x80 // RWA, enable flash ROM code area being erase/write: 0=code writing protect, 1=enable code area program and erase
|
|
#define R8_GLOB_CFG_INFO (*((PUINT8V)0x40001045)) // RO, global configuration information and status
|
|
#define RB_CFG_ROM_READ 0x01 // RO, indicate protected status of Flash ROM code and data: 0=reading protect, 1=enable read by external programmer
|
|
#define RB_CFG_RESET_EN 0x04 // RO, manual reset input enable status
|
|
#define RB_CFG_BOOT_EN 0x08 // RO, boot-loader enable status
|
|
#define RB_CFG_DEBUG_EN 0x10 // RO, debug enable status
|
|
#define RB_BOOT_LOADER 0x20 // RO, indicate boot loader status: 0=application status (by software reset), 1=boot loader status
|
|
#define R8_RST_WDOG_CTRL (*((PUINT8V)0x40001046)) // RWA, reset and watch-dog control, SAM
|
|
#define RB_SOFTWARE_RESET 0x01 // WA/WZ, global software reset, high action, auto clear
|
|
#define RB_WDOG_RST_EN 0x02 // RWA, enable watch-dog reset if watch-dog timer overflow: 0=as timer only, 1=enable reset if timer overflow
|
|
#define RB_WDOG_INT_EN 0x04 // RWA, watch-dog timer overflow interrupt enable: 0=disable, 1=enable
|
|
#define RB_WDOG_INT_FLAG 0x10 // RW1, watch-dog timer overflow interrupt flag, cleared by RW1 or reload watch-dog count or __SEV(Send-Event)
|
|
#define R8_GLOB_RESET_KEEP (*((PUINT8V)0x40001047)) // RW, value keeper during global reset
|
|
|
|
/* System: clock configuration register */
|
|
#define R32_CLOCK_CONFIG (*((PUINT32V)0x40001008)) // RWA, clock configuration, SAM
|
|
#define R16_CLK_SYS_CFG (*((PUINT16V)0x40001008)) // RWA, system clock configuration, SAM
|
|
#define RB_CLK_PLL_DIV 0x1F // RWA, output clock divider from PLL or CK32M
|
|
#define RB_CLK_SYS_MOD 0xC0 // RWA, system clock source mode: 00=divided from 32MHz, 01=divided from PLL-480MHz, 10=directly from 32MHz, 11=directly from 32KHz
|
|
#define R8_HFCK_PWR_CTRL (*((PUINT8V)0x4000100A)) // RWA, high frequency clock module power control, SAM
|
|
#define RB_CLK_XT32M_PON 0x04 // RWA, external 32MHz oscillator power control: 0=power down, 1-power on
|
|
#define RB_CLK_XT32M_KEEP 0x08 // RWA, external 32MHz oscillator power keep under halt mode: 0=auto stop, 1=keep running
|
|
#define RB_CLK_PLL_PON 0x10 // RWA, PLL power control: 0=power down, 1-power on
|
|
// Fck32k = RB_CLK_OSC32K_XT ? XT_32KHz : RC_32KHz
|
|
// Fpll = XT_32MHz * 15 = 480MHz
|
|
// Fsys = RB_CLK_SYS_MOD==3 ? Fck32k : ( ( RB_CLK_SYS_MOD[0] ? Fpll : XT_32MHz ) / RB_CLK_PLL_DIV )
|
|
// default: Fsys = XT_32MHz / RB_CLK_PLL_DIV = 32MHz / 5 = 6.4MHz
|
|
// range: 32KHz, 2MHz~10MHz, 15MHz~80MHz
|
|
|
|
/* System: sleep control register */
|
|
#define R32_SLEEP_CONTROL (*((PUINT32V)0x4000100C)) // RWA, sleep control, SAM
|
|
#define R8_SLP_CLK_OFF0 (*((PUINT8V)0x4000100C)) // RWA, sleep clock off control byte 0, SAM
|
|
#define RB_SLP_CLK_TMR0 0x01 // RWA, close TMR0 clock
|
|
#define RB_SLP_CLK_TMR1 0x02 // RWA, close TMR1 clock
|
|
#define RB_SLP_CLK_TMR2 0x04 // RWA, close TMR2 clock
|
|
#define RB_SLP_CLK_TMR3 0x08 // RWA, close TMR3 clock
|
|
#define RB_SLP_CLK_UART0 0x10 // RWA, close UART0 clock
|
|
#define RB_SLP_CLK_UART1 0x20 // RWA, close UART1 clock
|
|
#define RB_SLP_CLK_UART2 0x40 // RWA, close UART2 clock
|
|
#define RB_SLP_CLK_UART3 0x80 // RWA, close UART3 clock
|
|
#define R8_SLP_CLK_OFF1 (*((PUINT8V)0x4000100D)) // RWA, sleep clock off control byte 1, SAM
|
|
#define RB_SLP_CLK_SPI0 0x01 // RWA, close SPI0 clock
|
|
#define RB_SLP_CLK_SPI1 0x02 // RWA, close SPI1 clock
|
|
#define RB_SLP_CLK_PWMX 0x04 // RWA, close PWMx clock
|
|
#define RB_SLP_CLK_I2C 0x08 // RWA, close I2C clock
|
|
#define RB_SLP_CLK_USB 0x10 // RWA, close USB clock
|
|
#define RB_SLP_CLK_USB2 0x20 // RWA, close USB2 clock
|
|
#define RB_SLP_CLK_BLE 0x80 // RWA, close BLE clock
|
|
#define R8_SLP_WAKE_CTRL (*((PUINT8V)0x4000100E)) // RWA, wake control, SAM
|
|
#define RB_SLP_USB_WAKE 0x01 // RWA, enable USB waking
|
|
#define RB_SLP_USB2_WAKE 0x02 // RWA, enable USB2 waking
|
|
//#define RB_SLP_BLE_WAKE 0x04 // RWA, enable BLE waking
|
|
#define RB_SLP_RTC_WAKE 0x08 // RWA, enable RTC waking
|
|
#define RB_SLP_GPIO_WAKE 0x10 // RWA, enable GPIO waking
|
|
#define RB_SLP_BAT_WAKE 0x20 // RWA, enable BAT waking
|
|
#define RB_WAKE_EV_MODE 0x40 // RWA, event wakeup mode: 0=event keep valid for long time, 1=short pulse event
|
|
#define R8_SLP_POWER_CTRL (*((PUINT8V)0x4000100F)) // RWA, peripherals power down control, SAM
|
|
#define RB_WAKE_DLY_MOD 0x03 // RWA, wakeup delay time selection
|
|
// RB_WAKE_DLY_MOD select wakeup delay
|
|
// 00: long time, 3590 cycles+TSUHSE
|
|
// 01: short time, 520 cycles+TSUHSE
|
|
// 10: shorter time, 70 cycles+TSUHSE
|
|
// 11: no delay, 8 cycles+TSUHSE
|
|
//#define RB_SLP_USB_PWR_DN 0x01 // RWA, enable USB power down
|
|
//#define RB_SLP_BLE_PWR_DN 0x04 // RWA, enable BLE power down
|
|
#define RB_SLP_CLK_RAMX 0x10 // RWA, close main SRAM clock
|
|
#define RB_SLP_CLK_RAM2K 0x20 // RWA, close retention 2KB SRAM clock
|
|
#define RB_RAM_RET_LV 0x40 // RWA, SRAM retention voltage selection: 0=normal, 1=low voltage for low power
|
|
|
|
/* System: I/O pin configuration register */
|
|
#define R32_PIN_CONFIG (*((PUINT32V)0x40001018)) // RW, I/O pin configuration
|
|
#define R16_PIN_ALTERNATE (*((PUINT16V)0x40001018)) // RW, function pin alternate configuration
|
|
#define RB_PIN_TMR0 0x01 // RW, TMR0 alternate pin enable: 0=TMR0/PWM0/CAP0 on PA[9], 1=TMR0_/PWM0_/CAP0_ on PB[23]
|
|
#define RB_PIN_TMR1 0x02 // RW, TMR1 alternate pin enable: 0=TMR1/PWM1/CAP1 on PA[10], 1=TMR1_/PWM1_/CAP1_ on PB[10]
|
|
#define RB_PIN_TMR2 0x04 // RW, TMR2 alternate pin enable: 0=TMR2/PWM2/CAP2 on PA[11], 1=TMR2_/PWM2_/CAP2_ on PB[11]
|
|
#define RB_PIN_TMR3 0x08 // RW, TMR3 alternate pin enable: 0=TMR3/PWM3/CAP3 on PA[2], 1=TMR3_/PWM3_/CAP3_ on PB[22]
|
|
#define RB_PIN_UART0 0x10 // RW, RXD0/TXD0 alternate pin enable: 0=RXD0/TXD0 on PB[4]/PB[7], 1=RXD0_/TXD0_ on PA[15]/PA[14]
|
|
#define RB_PIN_UART1 0x20 // RW, RXD1/TXD1 alternate pin enable: 0=RXD1/TXD1 on PA[8]/PA[9], 1=RXD1_/TXD1_ on PB[12]/PB[13]
|
|
#define RB_PIN_UART2 0x40 // RW, RXD2/TXD2 alternate pin enable: 0=RXD2/TXD2 on PA[6]/PA[7], 1=RXD2_/TXD2_ on PB[22]/PB[23]
|
|
#define RB_PIN_UART3 0x80 // RW, RXD3/TXD3 alternate pin enable: 0=RXD3/TXD3 on PA[4]/PA[5], 1=RXD3_/TXD3_ on PB[20]/PB[21]
|
|
#define RB_PIN_SPI0 0x100 // RW, SCS/SCK0/MOSI/MISO alternate pin enable: 0=SCS/SCK0/MOSI/MISO on PA[12]/PA[13]/PA[14]/PA[15], 1=SCS_/SCK0_/MOSI_/MISO_ on PB[12]/PB[13]/PB[14]/PB[15]
|
|
#define RB_PIN_PWMX 0x400 // RW, PWM4/PWM5/PWM7/PWM8/PWM9 alternate pin enable: 0=PWM4/5/7/8/9 on PA[12]/PA[13]/PB[4]/PB[6]/PB[7], 1=PWM4/5/7/8/9 on PA[6]/PA[7]/PB[1]/PB[2]/P[3]
|
|
#define RB_PIN_I2C 0x800 // RW, SCL/SDA alternate pin enable: 0=SCL/SDA on PB[13]/PB[12], 1=SCL_/SDA_ on PB[21]/PB[20]
|
|
#define RB_PIN_MODEM 0x1000 // RW, DSR/DTR alternate pin enable: 0=DSR/DTR on PB[1]/PB[5], 1=DSR_/DTR_ on PB[14]/PB[15]
|
|
#define RB_PIN_INTX 0x2000 // RW, interrupt INT24/INT25 alternate pin enable: 0=INT24/INT25 on PB[8]/PB[9], 1=INT24_/INT25_ on PB[22]/PB[23]
|
|
#define RB_PIN_U0_INV 0x4000 // RW, RXD0/RXD0_/TXD0/TXD0_ invert input/output enable: 0=normal input/output, 1=RXD invert input, TXD invert output
|
|
#define RB_RF_ANT_SW_EN 0x8000 // RW, RF antenna switch control output enable: 0=disable output, 1=output on PB[16]/PB[17]/PB[18]/PB[19]/PB[20]/PB[21]
|
|
#define R16_PIN_ANALOG_IE (*((PUINT16V)0x4000101A)) // RW, analog pin enable and digital input disable
|
|
#define RB_PIN_ADC8_9_IE 0x01 // RW, ADC/TouchKey channel 9/8 digital input disable: 0=digital input enable, 1=digital input disable
|
|
#define RB_PIN_ADC6_7_IE 0x02 // RW, ADC/TouchKey channel 7/6 digital input disable: 0=digital input enable, 1=digital input disable
|
|
#define RB_PIN_ADC10_IE 0x04 // RW, ADC/TouchKey channel 10 digital input disable: 0=digital input enable, 1=digital input disable
|
|
#define RB_PIN_ADC11_IE 0x08 // RW, ADC/TouchKey channel 11 digital input disable: 0=digital input enable, 1=digital input disable
|
|
#define RB_PIN_USB2_DP_PU 0x10 // RW, USB2 UDP internal pullup resistance enable: 0=enable/disable by RB_UC_DEV_PU_EN, 1=enable pullup, replace RB_UC_DEV_PU_EN under sleep mode
|
|
#define RB_PIN_USB2_IE 0x20 // RW, USB2 analog I/O enable: 0=analog I/O disable, 1=analog I/O enable
|
|
#define RB_PIN_USB_DP_PU 0x40 // RW, USB UDP internal pullup resistance enable: 0=enable/disable by RB_UC_DEV_PU_EN, 1=enable pullup, replace RB_UC_DEV_PU_EN under sleep mode
|
|
#define RB_PIN_USB_IE 0x80 // RW, USB analog I/O enable: 0=analog I/O disable, 1=analog I/O enable
|
|
#define RB_PIN_ADC0_IE 0x0200 // RW, ADC/TouchKey channel 0 digital input disable: 0=digital input enable, 1=digital input disable
|
|
#define RB_PIN_ADC1_IE 0x0400 // RW, ADC/TouchKey channel 1 digital input disable: 0=digital input enable, 1=digital input disable
|
|
#define RB_PIN_ADC12_IE 0x0800 // RW, ADC/TouchKey channel 12 digital input disable: 0=digital input enable, 1=digital input disable
|
|
#define RB_PIN_ADC13_IE 0x1000 // RW, ADC/TouchKey channel 13 digital input disable: 0=digital input enable, 1=digital input disable
|
|
#define RB_PIN_XT32K_IE 0x2000 // RW, external 32KHz oscillator digital input disable: 0=digital input enable, 1=digital input disable
|
|
#define RB_PIN_ADC2_3_IE 0x4000 // RW, ADC/TouchKey channel 2/3 digital input disable: 0=digital input enable, 1=digital input disable
|
|
#define RB_PIN_ADC4_5_IE 0x8000 // RW, ADC/TouchKey channel 4/5 digital input disable: 0=digital input enable, 1=digital input disable
|
|
|
|
/* System: power management register */
|
|
#define R32_POWER_MANAG (*((PUINT32V)0x40001020)) // RWA, power management register, SAM
|
|
#define R16_POWER_PLAN (*((PUINT16V)0x40001020)) // RWA, power plan before sleep instruction, SAM
|
|
#define RB_PWR_XROM 0x01 // RWA, power for flash ROM
|
|
#define RB_PWR_RAM2K 0x02 // RWA, power for retention 2KB SRAM
|
|
#define RB_PWR_CORE 0x04 // RWA, power retention for core and base peripherals
|
|
#define RB_PWR_EXTEND 0x08 // RWA, power retention for USB and BLE
|
|
#define RB_PWR_RAM30K 0x10 // RWA, power for main SRAM
|
|
#define RB_PWR_SYS_EN 0x80 // RWA, power for system
|
|
//#define RB_PWR_LDO_EN 0x0100 // RWA, LDO enable
|
|
#define RB_PWR_DCDC_EN 0x0200 // RWA, DC/DC converter enable: 0=DC/DC disable and bypass, 1=DC/DC enable
|
|
#define RB_PWR_DCDC_PRE 0x0400 // RWA, DC/DC converter pre-enable
|
|
#define RB_PWR_PLAN_EN 0x8000 // RWA/WZ, power plan enable, auto clear after sleep executed
|
|
#define RB_PWR_MUST_0010 0x1000 // RWA, must write 0010
|
|
#define R16_AUX_POWER_ADJ (*((PUINT8V)0x40001022)) // RWA, aux power adjust control, SAM
|
|
#define RB_ULPLDO_ADJ 0x0007 // RWA, Ultra-Low-Power LDO voltage adjust
|
|
#define RB_DCDC_CHARGE 0x0080 // RWA, DC/DC aux charge enable
|
|
|
|
/* System: battery detector register */
|
|
#define R32_BATTERY_CTRL (*((PUINT32V)0x40001024)) // RWA, battery voltage detector, SAM
|
|
#define R8_BAT_DET_CTRL (*((PUINT8V)0x40001024)) // RWA, battery voltage detector control, SAM
|
|
#define RB_BAT_DET_EN 0x01 // RWA, battery voltage detector enable if RB_BAT_MON_EN=0
|
|
#define RB_BAT_LOW_VTHX 0x01 // RWA, select monitor threshold voltage if RB_BAT_MON_EN=1
|
|
#define RB_BAT_MON_EN 0x02 // RWA, battery voltage monitor enable under sleep mode
|
|
#define RB_BAT_LOWER_IE 0x04 // RWA, interrupt enable for battery lower voltage
|
|
#define RB_BAT_LOW_IE 0x08 // RWA, interrupt enable for battery low voltage
|
|
// request NMI interrupt if both RB_BAT_LOWER_IE and RB_BAT_LOW_IE enabled
|
|
#define R8_BAT_DET_CFG (*((PUINT8V)0x40001025)) // RWA, battery voltage detector configuration, SAM
|
|
#define RB_BAT_LOW_VTH 0x03 // RWA, select detector/monitor threshold voltage of battery voltage low
|
|
#define R8_BAT_STATUS (*((PUINT8V)0x40001026)) // RO, battery status
|
|
#define RB_BAT_STAT_LOWER 0x01 // RO, battery lower voltage status for detector, high action
|
|
#define RB_BAT_STAT_LOW 0x02 // RO, battery low voltage status for detector/monitor, high action
|
|
|
|
/* System: 32KHz oscillator control register */
|
|
#define R32_OSC32K_CTRL (*((PUINT32V)0x4000102C)) // RWA, 32KHz oscillator control, SAM
|
|
#define R16_INT32K_TUNE (*((PUINT16V)0x4000102C)) // RWA, internal 32KHz oscillator tune control, SAM
|
|
#define RB_INT32K_TUNE 0x1FFF // RWA, internal 32KHz oscillator frequency tune
|
|
#define R8_XT32K_TUNE (*((PUINT8V)0x4000102E)) // RWA, external 32KHz oscillator tune control, SAM
|
|
#define RB_XT32K_I_TUNE 0x03 // RWA, external 32KHz oscillator current tune: 00=75% current, 01=standard current, 10=150% current, 11=200% current for startup
|
|
#define RB_XT32K_C_LOAD 0xF0 // RWA, external 32KHz oscillator load capacitor tune: Cap = RB_XT32K_C_LOAD + 12pF
|
|
#define R8_CK32K_CONFIG (*((PUINT8V)0x4000102F)) // RWA, 32KHz oscillator configure
|
|
#define RB_CLK_XT32K_PON 0x01 // RWA, external 32KHz oscillator power on
|
|
#define RB_CLK_INT32K_PON 0x02 // RWA, internal 32KHz oscillator power on
|
|
#define RB_CLK_OSC32K_XT 0x04 // RWA, 32KHz oscillator source selection: 0=RC, 1=XT
|
|
#define RB_CLK_OSC32K_FILT 0x08 // RWA, internal 32KHz oscillator low noise mode disable: 0=enable, 1=disable
|
|
#define RB_32K_CLK_PIN 0x80 // RO, 32KHz oscillator clock pin status
|
|
|
|
/* System: real-time clock register */
|
|
#define R32_RTC_CTRL (*((PUINT32V)0x40001030)) // RWA, RTC control, SAM
|
|
#define R8_RTC_FLAG_CTRL (*((PUINT8V)0x40001030)) // RW, RTC flag and clear control
|
|
#define RB_RTC_TMR_CLR 0x10 // RW, set 1 to clear RTC timer action flag, auto clear
|
|
#define RB_RTC_TRIG_CLR 0x20 // RW, set 1 to clear RTC trigger action flag, auto clear
|
|
#define RB_RTC_TMR_FLAG 0x40 // RO, RTC timer action flag
|
|
#define RB_RTC_TRIG_FLAG 0x80 // RO, RTC trigger action flag
|
|
#define R8_RTC_MODE_CTRL (*((PUINT8V)0x40001031)) // RWA, RTC mode control, SAM
|
|
#define RB_RTC_TMR_MODE 0x07 // RWA, RTC timer mode: 000=0.125S, 001=0.25S, 010=0.5S, 011=1S, 100=2S, 101=4S, 110=8S, 111=16S
|
|
#define RB_RTC_IGNORE_B0 0x08 // RWA, force ignore bit0 for trigger mode: 0=compare bit0, 1=ignore bit0
|
|
#define RB_RTC_TMR_EN 0x10 // RWA, RTC timer mode enable
|
|
#define RB_RTC_TRIG_EN 0x20 // RWA, RTC trigger mode enable
|
|
#define RB_RTC_LOAD_LO 0x40 // RWA, set 1 to load RTC count low word R32_RTC_CNT_32K, auto clear after loaded
|
|
#define RB_RTC_LOAD_HI 0x80 // RWA, set 1 to load RTC count high word R32_RTC_CNT_DAY, auto clear after loaded
|
|
#define R32_RTC_TRIG (*((PUINT32V)0x40001034)) // RWA, RTC trigger value, SAM
|
|
#define R32_RTC_CNT_32K (*((PUINT32V)0x40001038)) // RO, RTC count based 32KHz
|
|
#define R16_RTC_CNT_32K (*((PUINT16V)0x40001038)) // RO, RTC count based 32KHz
|
|
#define R16_RTC_CNT_2S (*((PUINT16V)0x4000103A)) // RO, RTC count based 2 second
|
|
#define R32_RTC_CNT_DAY (*((PUINT32V)0x4000103C)) // RO, RTC count based one day, only low 14 bit
|
|
|
|
/*System: Miscellaneous Control register */
|
|
#define R32_MISC_CTRL (*((PUINT32V)0x40001048)) // RWA, miscellaneous control register
|
|
#define R8_PLL_CONFIG (*((PUINT8V)0x4000104B)) // RWA, PLL configuration control, SAM
|
|
#define RB_FLASH_IO_MOD 0x80 // RWA, flash ROM interface mode, SAM
|
|
#define RB_PLL_CFG_DAT 0x7F // RWA, PLL configuration control, SAM
|
|
|
|
/* System: 32MHz oscillator control register */
|
|
#define R32_OSC32M_CTRL (*((PUINT32V)0x4000104C)) // RWA, 32MHz oscillator control, SAM
|
|
#define R8_XT32M_TUNE (*((PUINT8V)0x4000104E)) // RWA, external 32MHz oscillator tune control, SAM
|
|
#define RB_XT32M_I_BIAS 0x03 // RWA, external 32MHz oscillator bias current tune: 00=75% current, 01=standard current, 10=125% current, 11=150% current
|
|
#define RB_XT32M_C_LOAD 0x70 // RWA, external 32MHz oscillator load capacitor tune: Cap = RB_XT32M_C_LOAD * 2 + 10pF
|
|
|
|
/* System: oscillator frequency calibration register */
|
|
#define R32_OSC_CALIB (*((PUINT32V)0x40001050)) // RWA, oscillator frequency calibration, SAM
|
|
#define R16_OSC_CAL_CNT (*((PUINT16V)0x40001050)) // RO, system clock count value for 32KHz multi-cycles
|
|
#define RB_OSC_CAL_CNT 0x3FFF // RO, system clock count value for 32KHz multi-cycles
|
|
#define RB_OSC_CAL_OV_CLR 0x4000 // RW1, indicate R8_OSC_CAL_OV_CNT not zero, set 1 to clear R8_OSC_CAL_OV_CNT
|
|
#define RB_OSC_CAL_IF 0x8000 // RW1, interrupt flag for oscillator capture end, set 1 to clear
|
|
#define R8_OSC_CAL_OV_CNT (*((PUINT8V)0x40001052)) // RO, oscillator frequency calibration overflow times
|
|
#define R8_OSC_CAL_CTRL (*((PUINT8V)0x40001053)) // RWA, oscillator frequency calibration control, SAM
|
|
#define RB_OSC_CNT_TOTAL 0x07 // RWA, total cycles mode for oscillator capture
|
|
// RB_OSC_CNT_TOTAL: select total cycles for oscillator capture
|
|
// 000: 1
|
|
// 001: 2
|
|
// 010: 4
|
|
// 011: 32
|
|
// 100: 64
|
|
// 101: 128
|
|
// 110: 1024
|
|
// 111: 2047
|
|
#define RB_OSC_CNT_HALT 0x08 // RO, calibration counter halt status: 0=counting, 1=halt for reading count value
|
|
#define RB_OSC_CAL_IE 0x10 // RWA, interrupt enable for oscillator capture end
|
|
#define RB_OSC_CNT_EN 0x20 // RWA, calibration counter enable
|
|
#define RB_OSC_CNT_END 0x40 // RWA, select oscillator capture end mode: 0=normal, 1=append 2 cycles
|
|
|
|
/* System: ADC and Touch-key register */
|
|
#define R32_ADC_CTRL (*((PUINT32V)0x40001058)) // RW, ADC control
|
|
#define R8_ADC_CHANNEL (*((PUINT8V)0x40001058)) // RW, ADC input channel selection
|
|
#define RB_ADC_CH_INX 0x0F // RW, ADC input channel index
|
|
#define R8_ADC_CFG (*((PUINT8V)0x40001059)) // RW, ADC configure
|
|
#define RB_ADC_POWER_ON 0x01 // RW, ADC power control: 0=power down, 1=power on
|
|
#define RB_ADC_BUF_EN 0x02 // RW, ADC input buffer enable
|
|
#define RB_ADC_DIFF_EN 0x04 // RW, ADC input channel mode: 0=single-end, 1=differnetial
|
|
#define RB_ADC_OFS_TEST 0x08 // RW, enable ADC offset test mode: 0=normal mode, 1=short to test offset
|
|
#define RB_ADC_PGA_GAIN 0x30 // RW, set ADC input PGA gain: 00=-12dB, 01=-6dB, 10=0dB, 11=6dB
|
|
#define RB_ADC_CLK_DIV 0xC0 // RW, select ADC clock frequency: 00=3.2MHz, 01=8MHz, 10=5.33MHz, 11=4MHz
|
|
#define R8_ADC_CONVERT (*((PUINT8V)0x4000105A)) // RW, ADC convert control
|
|
#define RB_ADC_START 0x01 // RW, ADC convert start control: 0=stop ADC convert, 1=start an ADC convert, auto clear
|
|
#define RB_ADC_EOC_X 0x80 // RO, end of ADC conversion flag
|
|
#define R8_TEM_SENSOR (*((PUINT8V)0x4000105B)) // RW, temperature sensor control
|
|
#define RB_TEM_SEN_PWR_ON 0x80 // RW, temperature sensor power control: 0=power down, 1=power on
|
|
#define R32_ADC_DATA (*((PUINT32V)0x4000105C)) // RO, ADC data and status
|
|
#define R16_ADC_DATA (*((PUINT16V)0x4000105C)) // RO, ADC data
|
|
#define RB_ADC_DATA 0x0FFF // RO, ADC conversion data
|
|
#define R8_ADC_INT_FLAG (*((PUINT8V)0x4000105E)) // RO, ADC interrupt flag register
|
|
#define RB_ADC_IF_EOC 0x80 // RO, ADC conversion interrupt flag: 0=free or converting, 1=end of conversion, interrupt action, auto ADC or write R8_ADC_CONVERT or write R8_TKEY_CONVERT to clear flag
|
|
#define R32_TKEY_CTRL (*((PUINT8V)0x40001054)) // RW, Touchkey control
|
|
#define R8_TKEY_COUNT (*((PUINT8V)0x40001054)) // RW, Touchkey charge and discharge count
|
|
#define RB_TKEY_CHARG_CNT 0x1F // RW, Touchkey charge count
|
|
#define RB_TKEY_DISCH_CNT 0xE0 // RW, Touchkey discharge count
|
|
#define R8_TKEY_CONVERT (*((PUINT8V)0x40001056)) // RW, Touchkey convert control
|
|
#define RB_TKEY_START 0x01 // RW, Touchkey convert start control: 0=stop Touchkey convert, 1=start a Touchkey convert, auto clear
|
|
#define R8_TKEY_CFG (*((PUINT8V)0x40001057)) // RW, Touchkey configure
|
|
#define RB_TKEY_PWR_ON 0x01 // RW, Touchkey power on: 0=power down, 1=power on
|
|
#define RB_TKEY_CURRENT 0x02 // RW, Touchkey charge current selection: 0=35uA, 1=70uA
|
|
#define RB_TKEY_DRV_EN 0x04 // RW, Touchkey drive shield enable
|
|
#define RB_TKEY_PGA_ADJ 0x08 // RW, ADC input PGA speed selection: 0=slow, 1=fast
|
|
#define R32_ADC_DMA_CTRL (*((PUINT32V)0x40001060)) // RW, ADC DMA control
|
|
#define R8_ADC_CTRL_DMA (*((PUINT8V)0x40001061)) // RW, ADC DMA control
|
|
#define RB_ADC_DMA_ENABLE 0x01 // RW, ADC DMA enable
|
|
#define RB_ADC_DMA_LOOP 0x04 // RW, ADC DMA address loop enable
|
|
#define RB_ADC_IE_DMA_END 0x08 // RW, enable interrupt for ADC DMA completion
|
|
#define RB_ADC_IE_EOC 0x10 // RW, enable interrupt for end of ADC conversion
|
|
#define RB_ADC_CONT_EN 0x40 // RW, enable contineous conversion ADC
|
|
#define RB_ADC_AUTO_EN 0x80 // RW, enable auto continuing ADC for DMA
|
|
#define R8_ADC_DMA_IF (*((PUINT8V)0x40001062)) // RW1, ADC interrupt flag
|
|
#define RB_ADC_IF_DMA_END 0x08 // RW1, interrupt flag for ADC DMA completion
|
|
#define RB_ADC_IF_END_ADC 0x10 // RW1, interrupt flag for end of ADC conversion, DMA for auto ADC or write R8_ADC_CONVERT to clear flag
|
|
#define R8_ADC_AUTO_CYCLE (*((PUINT8V)0x40001063)) // RW, auto ADC cycle value, unit is 16 Fsys
|
|
#define R32_ADC_DMA_NOW (*((PUINT32V)0x40001064)) // RW, ADC DMA current address
|
|
#define R16_ADC_DMA_NOW (*((PUINT16V)0x40001064)) // RW, ADC DMA current address
|
|
#define R32_ADC_DMA_BEG (*((PUINT32V)0x40001068)) // RW, ADC DMA begin address
|
|
#define R16_ADC_DMA_BEG (*((PUINT16V)0x40001068)) // RW, ADC DMA begin address
|
|
#define R32_ADC_DMA_END (*((PUINT32V)0x4000106C)) // RW, ADC DMA end address
|
|
#define R16_ADC_DMA_END (*((PUINT16V)0x4000106C)) // RW, ADC DMA end address
|
|
|
|
/* System: Flash ROM control register */
|
|
#define R32_FLASH_DATA (*((PUINT32V)0x40001800)) // RO/WO, flash ROM data
|
|
#define R32_FLASH_CONTROL (*((PUINT32V)0x40001804)) // RW, flash ROM control
|
|
#define R8_FLASH_DATA (*((PUINT8V)0x40001804)) // RO/WO, flash ROM data buffer
|
|
#define R8_FLASH_CTRL (*((PUINT8V)0x40001806)) // RW, flash ROM access control
|
|
#define R8_FLASH_CFG (*((PUINT8V)0x40001807)) // RW, flash ROM access config, SAM
|
|
|
|
/* System: GPIO interrupt control register */
|
|
#define R32_GPIO_INT_EN (*((PUINT32V)0x40001090)) // RW, GPIO interrupt enable
|
|
#define R16_PA_INT_EN (*((PUINT16V)0x40001090)) // RW, GPIO PA interrupt enable
|
|
#define R16_PB_INT_EN (*((PUINT16V)0x40001092)) // RW, GPIO PB interrupt enable
|
|
#define R32_GPIO_INT_MODE (*((PUINT32V)0x40001094)) // RW, GPIO interrupt mode: 0=level action, 1=edge action
|
|
#define R16_PA_INT_MODE (*((PUINT16V)0x40001094)) // RW, GPIO PA interrupt mode: 0=level action, 1=edge action
|
|
#define R16_PB_INT_MODE (*((PUINT16V)0x40001096)) // RW, GPIO PB interrupt mode: 0=level action, 1=edge action
|
|
#define R32_GPIO_INT_IF (*((PUINT32V)0x4000109C)) // RW1, GPIO interrupt flag
|
|
#define R16_PA_INT_IF (*((PUINT16V)0x4000109C)) // RW1, GPIO PA interrupt flag
|
|
#define R16_PB_INT_IF (*((PUINT16V)0x4000109E)) // RW1, GPIO PB interrupt flag
|
|
|
|
/* GPIO PA register */
|
|
#define R32_PA_DIR (*((PUINT32V)0x400010A0)) // RW, GPIO PA I/O direction: 0=in, 1=out
|
|
#define R8_PA_DIR_0 (*((PUINT8V)0x400010A0)) // RW, GPIO PA I/O direction byte 0
|
|
#define R8_PA_DIR_1 (*((PUINT8V)0x400010A1)) // RW, GPIO PA I/O direction byte 1
|
|
#define R32_PA_PIN (*((PUINT32V)0x400010A4)) // RO, GPIO PA input
|
|
#define R8_PA_PIN_0 (*((PUINT8V)0x400010A4)) // RO, GPIO PA input byte 0
|
|
#define R8_PA_PIN_1 (*((PUINT8V)0x400010A5)) // RO, GPIO PA input byte 1
|
|
#define R32_PA_OUT (*((PUINT32V)0x400010A8)) // RW, GPIO PA output
|
|
#define R8_PA_OUT_0 (*((PUINT8V)0x400010A8)) // RW, GPIO PA output byte 0
|
|
#define R8_PA_OUT_1 (*((PUINT8V)0x400010A9)) // RW, GPIO PA output byte 1
|
|
#define R32_PA_CLR (*((PUINT32V)0x400010AC)) // WZ, GPIO PA clear output: 0=keep, 1=clear
|
|
#define R8_PA_CLR_0 (*((PUINT8V)0x400010AC)) // WZ, GPIO PA clear output byte 0
|
|
#define R8_PA_CLR_1 (*((PUINT8V)0x400010AD)) // WZ, GPIO PA clear output byte 1
|
|
#define R32_PA_PU (*((PUINT32V)0x400010B0)) // RW, GPIO PA pullup resistance enable
|
|
#define R8_PA_PU_0 (*((PUINT8V)0x400010B0)) // RW, GPIO PA pullup resistance enable byte 0
|
|
#define R8_PA_PU_1 (*((PUINT8V)0x400010B1)) // RW, GPIO PA pullup resistance enable byte 1
|
|
#define R32_PA_PD_DRV (*((PUINT32V)0x400010B4)) // RW, PA pulldown for input or PA driving capability for output
|
|
#define R8_PA_PD_DRV_0 (*((PUINT8V)0x400010B4)) // RW, PA pulldown for input or PA driving capability for output byte 0
|
|
#define R8_PA_PD_DRV_1 (*((PUINT8V)0x400010B5)) // RW, PA pulldown for input or PA driving capability for output byte 1
|
|
|
|
/* GPIO PB register */
|
|
#define R32_PB_DIR (*((PUINT32V)0x400010C0)) // RW, GPIO PB I/O direction: 0=in, 1=out
|
|
#define R8_PB_DIR_0 (*((PUINT8V)0x400010C0)) // RW, GPIO PB I/O direction byte 0
|
|
#define R8_PB_DIR_1 (*((PUINT8V)0x400010C1)) // RW, GPIO PB I/O direction byte 1
|
|
#define R8_PB_DIR_2 (*((PUINT8V)0x400010C2)) // RW, GPIO PB I/O direction byte 2
|
|
#define R32_PB_PIN (*((PUINT32V)0x400010C4)) // RO, GPIO PB input
|
|
#define R8_PB_PIN_0 (*((PUINT8V)0x400010C4)) // RO, GPIO PB input byte 0
|
|
#define R8_PB_PIN_1 (*((PUINT8V)0x400010C5)) // RO, GPIO PB input byte 1
|
|
#define R8_PB_PIN_2 (*((PUINT8V)0x400010C6)) // RO, GPIO PB input byte 2
|
|
#define R32_PB_OUT (*((PUINT32V)0x400010C8)) // RW, GPIO PB output
|
|
#define R8_PB_OUT_0 (*((PUINT8V)0x400010C8)) // RW, GPIO PB output byte 0
|
|
#define R8_PB_OUT_1 (*((PUINT8V)0x400010C9)) // RW, GPIO PB output byte 1
|
|
#define R8_PB_OUT_2 (*((PUINT8V)0x400010CA)) // RW, GPIO PB output byte 2
|
|
#define R32_PB_CLR (*((PUINT32V)0x400010CC)) // WZ, GPIO PB clear output: 0=keep, 1=clear
|
|
#define R8_PB_CLR_0 (*((PUINT8V)0x400010CC)) // WZ, GPIO PB clear output byte 0
|
|
#define R8_PB_CLR_1 (*((PUINT8V)0x400010CD)) // WZ, GPIO PB clear output byte 1
|
|
#define R8_PB_CLR_2 (*((PUINT8V)0x400010CE)) // WZ, GPIO PB clear output byte 2
|
|
#define R32_PB_PU (*((PUINT32V)0x400010D0)) // RW, GPIO PB pullup resistance enable
|
|
#define R8_PB_PU_0 (*((PUINT8V)0x400010D0)) // RW, GPIO PB pullup resistance enable byte 0
|
|
#define R8_PB_PU_1 (*((PUINT8V)0x400010D1)) // RW, GPIO PB pullup resistance enable byte 1
|
|
#define R8_PB_PU_2 (*((PUINT8V)0x400010D2)) // RW, GPIO PB pullup resistance enable byte 2
|
|
#define R32_PB_PD_DRV (*((PUINT32V)0x400010D4)) // RW, PB pulldown for input or PB driving capability for output
|
|
#define R8_PB_PD_DRV_0 (*((PUINT8V)0x400010D4)) // RW, PB pulldown for input or PB driving capability for output byte 0
|
|
#define R8_PB_PD_DRV_1 (*((PUINT8V)0x400010D5)) // RW, PB pulldown for input or PB driving capability for output byte 1
|
|
#define R8_PB_PD_DRV_2 (*((PUINT8V)0x400010D6)) // RW, PB pulldown for input or PB driving capability for output byte 2
|
|
|
|
/* GPIO register address offset and bit define */
|
|
#define BA_PA ((PUINT8V)0x400010A0) // point GPIO PA base address
|
|
#define BA_PB ((PUINT8V)0x400010C0) // point GPIO PB base address
|
|
#define GPIO_DIR 0x00
|
|
#define GPIO_DIR_0 0x00
|
|
#define GPIO_DIR_1 0x01
|
|
#define GPIO_DIR_2 0x02
|
|
#define GPIO_PIN 0x04
|
|
#define GPIO_PIN_0 0x04
|
|
#define GPIO_PIN_1 0x05
|
|
#define GPIO_PIN_2 0x06
|
|
#define GPIO_OUT 0x08
|
|
#define GPIO_OUT_0 0x08
|
|
#define GPIO_OUT_1 0x09
|
|
#define GPIO_OUT_2 0x0A
|
|
#define GPIO_CLR 0x0C
|
|
#define GPIO_CLR_0 0x0C
|
|
#define GPIO_CLR_1 0x0D
|
|
#define GPIO_CLR_2 0x0E
|
|
#define GPIO_PU 0x10
|
|
#define GPIO_PU_0 0x10
|
|
#define GPIO_PU_1 0x11
|
|
#define GPIO_PU_2 0x12
|
|
#define GPIO_PD_DRV 0x14
|
|
#define GPIO_PD_DRV_0 0x14
|
|
#define GPIO_PD_DRV_1 0x15
|
|
#define GPIO_PD_DRV_2 0x16
|
|
|
|
/* GPIO alias name */
|
|
#define bAIN9 (1<<0) // PA0
|
|
#define bSCK1 (1<<0) // PA0
|
|
#define bAIN8 (1<<1) // PA1
|
|
#define bSDO (1<<1) // PA1
|
|
#define bMOSI1 bSDO
|
|
#define bAIN7 (1<<2) // PA2
|
|
#define bTMR3_ (1<<2) // PA2
|
|
#define bCAP3_ bTMR3_
|
|
#define bPWM3_ bTMR3_
|
|
#define bSDI (1<<2) // PA2
|
|
#define bMISO1 bSDI
|
|
#define bAIN6 (1<<3) // PA3
|
|
#define bAIN0 (1<<4) // PA4
|
|
#define bRXD3 (1<<4) // PA4
|
|
#define bAIN1 (1<<5) // PA5
|
|
#define bTXD3 (1<<5) // PA5
|
|
#define bAIN10 (1<<6) // PA6
|
|
#define bRXD2 (1<<6) // PA6
|
|
#define bPWM4_ (1<<6) // PA6
|
|
#define bAIN11 (1<<7) // PA7
|
|
#define bTXD2 (1<<7) // PA7
|
|
#define bPWM5_ (1<<7) // PA7
|
|
#define bAIN12 (1<<8) // PA8
|
|
#define bRXD1 (1<<8) // PA8
|
|
#define bAIN13 (1<<9) // PA9
|
|
#define bTMR0 (1<<9) // PA9
|
|
#define bCAP0 bTMR0
|
|
#define bPWM0 bTMR0
|
|
#define bTXD1 (1<<9) // PA9
|
|
#define bX32KI (1<<10) // PA10
|
|
#define bTMR1 (1<<10) // PA10
|
|
#define bCAP1 bTMR1
|
|
#define bPWM1 bTMR1
|
|
#define bX32KO (1<<11) // PA11
|
|
#define bTMR2 (1<<11) // PA11
|
|
#define bCAP2 bTMR2
|
|
#define bPWM2 bTMR2
|
|
#define bAIN2 (1<<12) // PA12
|
|
#define bPWM4 (1<<12) // PA12
|
|
#define bSCS (1<<12) // PA12
|
|
#define bAIN3 (1<<13) // PA13
|
|
#define bSCK0 (1<<13) // PA13
|
|
#define bPWM5 (1<<13) // PA13
|
|
#define bAIN4 (1<<14) // PA14
|
|
#define bMOSI (1<<14) // PA14
|
|
#define bTXD0_ (1<<14) // PA14
|
|
#define bAIN5 (1<<15) // PA15
|
|
#define bMISO (1<<15) // PA15
|
|
#define bRXD0_ (1<<15) // PA15
|
|
#define bPWM6 (1<<0) // PB0
|
|
#define bCTS (1<<0) // PB0
|
|
#define bDSR (1<<1) // PB1
|
|
#define bPWM7_ (1<<1) // PB1
|
|
#define bRI (1<<2) // PB2
|
|
#define bPWM8_ (1<<2) // PB2
|
|
#define bDCD (1<<3) // PB3
|
|
#define bPWM9_ (1<<3) // PB3
|
|
#define bPWM7 (1<<4) // PB4
|
|
#define bRXD0 (1<<4) // PB4
|
|
#define bDTR (1<<5) // PB5
|
|
#define bRTS (1<<6) // PB6
|
|
#define bPWM8 (1<<6) // PB6
|
|
#define bTXD0 (1<<7) // PB7
|
|
#define bPWM9 (1<<7) // PB7
|
|
#define bUDM (1<<10) // PB10
|
|
#define bTMR1_ (1<<10) // PB10
|
|
#define bCAP1_ bTMR1_
|
|
#define bPWM1_ bTMR1_
|
|
#define bUDP (1<<11) // PB11
|
|
#define bTMR2_ (1<<11) // PB11
|
|
#define bCAP2_ bTMR2_
|
|
#define bPWM2_ bTMR2_
|
|
#define bU2DM (1<<12) // PB12
|
|
#define bSCS_ (1<<12) // PB12
|
|
#define bSDA (1<<12) // PB12
|
|
#define bRXD1_ (1<<12) // PB12
|
|
#define bU2DP (1<<13) // PB13
|
|
#define bSCK0_ (1<<13) // PB13
|
|
#define bSCL (1<<13) // PB13
|
|
#define bTXD1_ (1<<13) // PB13
|
|
#define bTIO (1<<14) // PB14
|
|
#define bDSR_ (1<<14) // PB14
|
|
#define bMOSI_ (1<<14) // PB14
|
|
#define bPWM10 (1<<14) // PB14
|
|
#define bTCK (1<<15) // PB15
|
|
#define bMISO_ (1<<15) // PB15
|
|
#define bDTR_ (1<<15) // PB15
|
|
#define bSDA_ (1<<20) // PB20
|
|
#define bSCL_ (1<<21) // PB21
|
|
#define bRXD2_ (1<<22) // PB22
|
|
#define bTMR3 (1<<22) // PB22
|
|
#define bCAP3 bTMR3
|
|
#define bPWM3 bTMR3
|
|
#define bRST (1<<23) // PB23
|
|
#define bTMR0_ (1<<23) // PB23
|
|
#define bCAP0_ bTMR0_
|
|
#define bPWM0_ bTMR0_
|
|
#define bTXD2_ (1<<23) // PB23
|
|
#define bPWM11 (1<<23) // PB23
|
|
|
|
/* Timer0 register */
|
|
#define R32_TMR0_CONTROL (*((PUINT32V)0x40002000)) // RW, TMR0 control
|
|
#define R8_TMR0_CTRL_MOD (*((PUINT8V)0x40002000)) // RW, TMR0 mode control
|
|
#define R8_TMR0_INTER_EN (*((PUINT8V)0x40002002)) // RW, TMR0 interrupt enable
|
|
#define R32_TMR0_STATUS (*((PUINT32V)0x40002004)) // RW, TMR0 status
|
|
#define R8_TMR0_INT_FLAG (*((PUINT8V)0x40002006)) // RW1, TMR0 interrupt flag
|
|
#define R8_TMR0_FIFO_COUNT (*((PUINT8V)0x40002007)) // RO, TMR0 FIFO count status
|
|
#define R32_TMR0_COUNT (*((PUINT32V)0x40002008)) // RO, TMR0 current count
|
|
#define R16_TMR0_COUNT (*((PUINT16V)0x40002008)) // RO, TMR0 current count
|
|
#define R8_TMR0_COUNT (*((PUINT8V)0x40002008)) // RO, TMR0 current count
|
|
#define R32_TMR0_CNT_END (*((PUINT32V)0x4000200C)) // RW, TMR0 end count value, only low 26 bit
|
|
#define R32_TMR0_FIFO (*((PUINT32V)0x40002010)) // RO/WO, TMR0 FIFO register, only low 26 bit
|
|
#define R16_TMR0_FIFO (*((PUINT16V)0x40002010)) // RO/WO, TMR0 FIFO register
|
|
#define R8_TMR0_FIFO (*((PUINT8V)0x40002010)) // RO/WO, TMR0 FIFO register
|
|
|
|
/* Timer1 register */
|
|
#define R32_TMR1_CONTROL (*((PUINT32V)0x40002400)) // RW, TMR1 control
|
|
#define R8_TMR1_CTRL_MOD (*((PUINT8V)0x40002400)) // RW, TMR1 mode control
|
|
#define R8_TMR1_CTRL_DMA (*((PUINT8V)0x40002401)) // RW, TMR1 DMA control
|
|
#define R8_TMR1_INTER_EN (*((PUINT8V)0x40002402)) // RW, TMR1 interrupt enable
|
|
#define R32_TMR1_STATUS (*((PUINT32V)0x40002404)) // RW, TMR1 status
|
|
#define R8_TMR1_INT_FLAG (*((PUINT8V)0x40002406)) // RW1, TMR1 interrupt flag
|
|
#define R8_TMR1_FIFO_COUNT (*((PUINT8V)0x40002407)) // RO, TMR1 FIFO count status
|
|
#define R32_TMR1_COUNT (*((PUINT32V)0x40002408)) // RO, TMR1 current count
|
|
#define R16_TMR1_COUNT (*((PUINT16V)0x40002408)) // RO, TMR1 current count
|
|
#define R8_TMR1_COUNT (*((PUINT8V)0x40002408)) // RO, TMR1 current count
|
|
#define R32_TMR1_CNT_END (*((PUINT32V)0x4000240C)) // RW, TMR1 end count value, only low 26 bit
|
|
#define R32_TMR1_FIFO (*((PUINT32V)0x40002410)) // RO/WO, TMR1 FIFO register, only low 26 bit
|
|
#define R16_TMR1_FIFO (*((PUINT16V)0x40002410)) // RO/WO, TMR1 FIFO register
|
|
#define R8_TMR1_FIFO (*((PUINT8V)0x40002410)) // RO/WO, TMR1 FIFO register
|
|
#define R32_TMR1_DMA_NOW (*((PUINT32V)0x40002414)) // RW, TMR1 DMA current address
|
|
#define R16_TMR1_DMA_NOW (*((PUINT16V)0x40002414)) // RW, TMR1 DMA current address
|
|
#define R32_TMR1_DMA_BEG (*((PUINT32V)0x40002418)) // RW, TMR1 DMA begin address
|
|
#define R16_TMR1_DMA_BEG (*((PUINT16V)0x40002418)) // RW, TMR1 DMA begin address
|
|
#define R32_TMR1_DMA_END (*((PUINT32V)0x4000241C)) // RW, TMR1 DMA end address
|
|
#define R16_TMR1_DMA_END (*((PUINT16V)0x4000241C)) // RW, TMR1 DMA end address
|
|
|
|
/* Timer2 register */
|
|
#define R32_TMR2_CONTROL (*((PUINT32V)0x40002800)) // RW, TMR2 control
|
|
#define R8_TMR2_CTRL_MOD (*((PUINT8V)0x40002800)) // RW, TMR2 mode control
|
|
#define R8_TMR2_CTRL_DMA (*((PUINT8V)0x40002801)) // RW, TMR2 DMA control
|
|
#define R8_TMR2_INTER_EN (*((PUINT8V)0x40002802)) // RW, TMR2 interrupt enable
|
|
#define R32_TMR2_STATUS (*((PUINT32V)0x40002804)) // RW, TMR2 status
|
|
#define R8_TMR2_INT_FLAG (*((PUINT8V)0x40002806)) // RW1, TMR2 interrupt flag
|
|
#define R8_TMR2_FIFO_COUNT (*((PUINT8V)0x40002807)) // RO, TMR2 FIFO count status
|
|
#define R32_TMR2_COUNT (*((PUINT32V)0x40002808)) // RO, TMR2 current count
|
|
#define R16_TMR2_COUNT (*((PUINT16V)0x40002808)) // RO, TMR2 current count
|
|
#define R8_TMR2_COUNT (*((PUINT8V)0x40002808)) // RO, TMR2 current count
|
|
#define R32_TMR2_CNT_END (*((PUINT32V)0x4000280C)) // RW, TMR2 end count value, only low 26 bit
|
|
#define R32_TMR2_FIFO (*((PUINT32V)0x40002810)) // RO/WO, TMR2 FIFO register, only low 26 bit
|
|
#define R16_TMR2_FIFO (*((PUINT16V)0x40002810)) // RO/WO, TMR2 FIFO register
|
|
#define R8_TMR2_FIFO (*((PUINT8V)0x40002810)) // RO/WO, TMR2 FIFO register
|
|
#define R32_TMR2_DMA_NOW (*((PUINT32V)0x40002814)) // RW, TMR2 DMA current address
|
|
#define R16_TMR2_DMA_NOW (*((PUINT16V)0x40002814)) // RW, TMR2 DMA current address
|
|
#define R32_TMR2_DMA_BEG (*((PUINT32V)0x40002818)) // RW, TMR2 DMA begin address
|
|
#define R16_TMR2_DMA_BEG (*((PUINT16V)0x40002818)) // RW, TMR2 DMA begin address
|
|
#define R32_TMR2_DMA_END (*((PUINT32V)0x4000281C)) // RW, TMR2 DMA end address
|
|
#define R16_TMR2_DMA_END (*((PUINT16V)0x4000281C)) // RW, TMR2 DMA end address
|
|
|
|
/* Timer3 register */
|
|
#define R32_TMR3_CONTROL (*((PUINT32V)0x40002C00)) // RW, TMR3 control
|
|
#define R8_TMR3_CTRL_MOD (*((PUINT8V)0x40002C00)) // RW, TMR3 mode control
|
|
#define R8_TMR3_INTER_EN (*((PUINT8V)0x40002C02)) // RW, TMR3 interrupt enable
|
|
#define R32_TMR3_STATUS (*((PUINT32V)0x40002C04)) // RW, TMR3 status
|
|
#define R8_TMR3_INT_FLAG (*((PUINT8V)0x40002C06)) // RW1, TMR3 interrupt flag
|
|
#define R8_TMR3_FIFO_COUNT (*((PUINT8V)0x40002C07)) // RO, TMR3 FIFO count status
|
|
#define R32_TMR3_COUNT (*((PUINT32V)0x40002C08)) // RO, TMR3 current count
|
|
#define R16_TMR3_COUNT (*((PUINT16V)0x40002C08)) // RO, TMR3 current count
|
|
#define R8_TMR3_COUNT (*((PUINT8V)0x40002C08)) // RO, TMR3 current count
|
|
#define R32_TMR3_CNT_END (*((PUINT32V)0x40002C0C)) // RW, TMR3 end count value, only low 26 bit
|
|
#define R32_TMR3_FIFO (*((PUINT32V)0x40002C10)) // RO/WO, TMR3 FIFO register, only low 26 bit
|
|
#define R16_TMR3_FIFO (*((PUINT16V)0x40002C10)) // RO/WO, TMR3 FIFO register
|
|
#define R8_TMR3_FIFO (*((PUINT8V)0x40002C10)) // RO/WO, TMR3 FIFO register
|
|
|
|
/* Timer register address offset and bit define */
|
|
#define TMR_FIFO_SIZE 8 // timer FIFO size (depth)
|
|
#define BA_TMR0 ((PUINT8V)0x40002000) // point TMR0 base address
|
|
#define BA_TMR1 ((PUINT8V)0x40002400) // point TMR1 base address
|
|
#define BA_TMR2 ((PUINT8V)0x40002800) // point TMR2 base address
|
|
#define BA_TMR3 ((PUINT8V)0x40002C00) // point TMR3 base address
|
|
#define TMR_CTRL_MOD 0
|
|
#define RB_TMR_MODE_IN 0x01 // RW, timer in mode: 0=timer/PWM, 1=capture/count
|
|
#define RB_TMR_ALL_CLEAR 0x02 // RW, force clear timer FIFO and count
|
|
#define RB_TMR_COUNT_EN 0x04 // RW, timer count enable
|
|
#define RB_TMR_OUT_EN 0x08 // RW, timer output enable
|
|
#define RB_TMR_OUT_POLAR 0x10 // RW, timer PWM output polarity: 0=default low and high action, 1=default high and low action
|
|
#define RB_TMR_CAP_COUNT 0x10 // RW, count sub-mode if RB_TMR_MODE_IN=1: 0=capture, 1=count
|
|
#define RB_TMR_PWM_REPEAT 0xC0 // RW, timer PWM repeat mode: 00=1, 01=4, 10=8, 11-16
|
|
#define RB_TMR_CAP_EDGE 0xC0 // RW, timer capture edge mode: 00=disable, 01=edge change, 10=fall to fall, 11-rise to rise
|
|
#define TMR_CTRL_DMA 1
|
|
#define RB_TMR_DMA_ENABLE 0x01 // RW, timer1/2 DMA enable
|
|
#define RB_TMR_DMA_LOOP 0x04 // RW, timer1/2 DMA address loop enable
|
|
#define TMR_INTER_EN 2
|
|
#define RB_TMR_IE_CYC_END 0x01 // RW, enable interrupt for timer capture count timeout or PWM cycle end
|
|
#define RB_TMR_IE_DATA_ACT 0x02 // RW, enable interrupt for timer capture input action or PWM trigger
|
|
#define RB_TMR_IE_FIFO_HF 0x04 // RW, enable interrupt for timer FIFO half (capture fifo >=4 or PWM fifo <=3)
|
|
#define RB_TMR_IE_DMA_END 0x08 // RW, enable interrupt for timer1/2 DMA completion
|
|
#define RB_TMR_IE_FIFO_OV 0x10 // RW, enable interrupt for timer FIFO overflow
|
|
#define TMR_INT_FLAG 6
|
|
#define RB_TMR_IF_CYC_END 0x01 // RW1, interrupt flag for timer capture count timeout or PWM cycle end
|
|
#define RB_TMR_IF_DATA_ACT 0x02 // RW1, interrupt flag for timer capture input action or PWM trigger
|
|
#define RB_TMR_IF_FIFO_HF 0x04 // RW1, interrupt flag for timer FIFO half (capture fifo >=4 or PWM fifo <=3)
|
|
#define RB_TMR_IF_DMA_END 0x08 // RW1, interrupt flag for timer1/2 DMA completion
|
|
#define RB_TMR_IF_FIFO_OV 0x10 // RW1, interrupt flag for timer FIFO overflow
|
|
#define TMR_FIFO_COUNT 7
|
|
#define TMR_COUNT 0x08
|
|
#define TMR_CNT_END 0x0C
|
|
#define TMR_FIFO 0x10
|
|
#define TMR_DMA_NOW 0x14
|
|
#define TMR_DMA_BEG 0x18
|
|
#define TMR_DMA_END 0x1C
|
|
|
|
/* UART0 register */
|
|
#define R32_UART0_CTRL (*((PUINT32V)0x40003000)) // RW, UART0 control
|
|
#define R8_UART0_MCR (*((PUINT8V)0x40003000)) // RW, UART0 modem control
|
|
#define R8_UART0_IER (*((PUINT8V)0x40003001)) // RW, UART0 interrupt enable
|
|
#define R8_UART0_FCR (*((PUINT8V)0x40003002)) // RW, UART0 FIFO control
|
|
#define R8_UART0_LCR (*((PUINT8V)0x40003003)) // RW, UART0 line control
|
|
#define R32_UART0_STAT (*((PUINT32V)0x40003004)) // RO, UART0 status
|
|
#define R8_UART0_IIR (*((PUINT8V)0x40003004)) // RO, UART0 interrupt identification
|
|
#define R8_UART0_LSR (*((PUINT8V)0x40003005)) // RO, UART0 line status
|
|
#define R8_UART0_MSR (*((PUINT8V)0x40003006)) // RO, UART0 modem status
|
|
#define R32_UART0_FIFO (*((PUINT32V)0x40003008)) // RW, UART0 data or FIFO port
|
|
#define R8_UART0_RBR (*((PUINT8V)0x40003008)) // RO, UART0 receiver buffer, receiving byte
|
|
#define R8_UART0_THR (*((PUINT8V)0x40003008)) // WO, UART0 transmitter holding, transmittal byte
|
|
#define R8_UART0_RFC (*((PUINT8V)0x4000300A)) // RO, UART0 receiver FIFO count
|
|
#define R8_UART0_TFC (*((PUINT8V)0x4000300B)) // RO, UART0 transmitter FIFO count
|
|
#define R32_UART0_SETUP (*((PUINT32V)0x4000300C)) // RW, UART0 setup
|
|
#define R16_UART0_DL (*((PUINT16V)0x4000300C)) // RW, UART0 divisor latch
|
|
#define R8_UART0_DLL (*((PUINT8V)0x4000300C)) // RW, UART0 divisor latch LSB byte
|
|
#define R8_UART0_DLM (*((PUINT8V)0x4000300D)) // RW, UART0 divisor latch MSB byte
|
|
#define R8_UART0_DIV (*((PUINT8V)0x4000300E)) // RW, UART0 pre-divisor latch byte, only low 7 bit, from 1 to 0/128
|
|
#define R8_UART0_ADR (*((PUINT8V)0x4000300F)) // RW, UART0 slave address: 0xFF=disable, other=enable
|
|
|
|
/* UART1 register */
|
|
#define R32_UART1_CTRL (*((PUINT32V)0x40003400)) // RW, UART1 control
|
|
#define R8_UART1_MCR (*((PUINT8V)0x40003400)) // RW, UART1 modem control
|
|
#define R8_UART1_IER (*((PUINT8V)0x40003401)) // RW, UART1 interrupt enable
|
|
#define R8_UART1_FCR (*((PUINT8V)0x40003402)) // RW, UART1 FIFO control
|
|
#define R8_UART1_LCR (*((PUINT8V)0x40003403)) // RW, UART1 line control
|
|
#define R32_UART1_STAT (*((PUINT32V)0x40003404)) // RO, UART1 status
|
|
#define R8_UART1_IIR (*((PUINT8V)0x40003404)) // RO, UART1 interrupt identification
|
|
#define R8_UART1_LSR (*((PUINT8V)0x40003405)) // RO, UART1 line status
|
|
#define R32_UART1_FIFO (*((PUINT32V)0x40003408)) // RW, UART1 data or FIFO port
|
|
#define R8_UART1_RBR (*((PUINT8V)0x40003408)) // RO, UART1 receiver buffer, receiving byte
|
|
#define R8_UART1_THR (*((PUINT8V)0x40003408)) // WO, UART1 transmitter holding, transmittal byte
|
|
#define R8_UART1_RFC (*((PUINT8V)0x4000340A)) // RO, UART1 receiver FIFO count
|
|
#define R8_UART1_TFC (*((PUINT8V)0x4000340B)) // RO, UART1 transmitter FIFO count
|
|
#define R32_UART1_SETUP (*((PUINT32V)0x4000340C)) // RW, UART1 setup
|
|
#define R16_UART1_DL (*((PUINT16V)0x4000340C)) // RW, UART1 divisor latch
|
|
#define R8_UART1_DLL (*((PUINT8V)0x4000340C)) // RW, UART1 divisor latch LSB byte
|
|
#define R8_UART1_DLM (*((PUINT8V)0x4000340D)) // RW, UART1 divisor latch MSB byte
|
|
#define R8_UART1_DIV (*((PUINT8V)0x4000340E)) // RW, UART1 pre-divisor latch byte, only low 7 bit, from 1 to 0/128
|
|
|
|
/* UART2 register */
|
|
#define R32_UART2_CTRL (*((PUINT32V)0x40003800)) // RW, UART2 control
|
|
#define R8_UART2_MCR (*((PUINT8V)0x40003800)) // RW, UART2 modem control
|
|
#define R8_UART2_IER (*((PUINT8V)0x40003801)) // RW, UART2 interrupt enable
|
|
#define R8_UART2_FCR (*((PUINT8V)0x40003802)) // RW, UART2 FIFO control
|
|
#define R8_UART2_LCR (*((PUINT8V)0x40003803)) // RW, UART2 line control
|
|
#define R32_UART2_STAT (*((PUINT32V)0x40003804)) // RO, UART2 status
|
|
#define R8_UART2_IIR (*((PUINT8V)0x40003804)) // RO, UART2 interrupt identification
|
|
#define R8_UART2_LSR (*((PUINT8V)0x40003805)) // RO, UART2 line status
|
|
#define R32_UART2_FIFO (*((PUINT32V)0x40003808)) // RW, UART2 data or FIFO port
|
|
#define R8_UART2_RBR (*((PUINT8V)0x40003808)) // RO, UART2 receiver buffer, receiving byte
|
|
#define R8_UART2_THR (*((PUINT8V)0x40003808)) // WO, UART2 transmitter holding, transmittal byte
|
|
#define R8_UART2_RFC (*((PUINT8V)0x4000380A)) // RO, UART2 receiver FIFO count
|
|
#define R8_UART2_TFC (*((PUINT8V)0x4000380B)) // RO, UART2 transmitter FIFO count
|
|
#define R32_UART2_SETUP (*((PUINT32V)0x4000380C)) // RW, UART2 setup
|
|
#define R16_UART2_DL (*((PUINT16V)0x4000380C)) // RW, UART2 divisor latch
|
|
#define R8_UART2_DLL (*((PUINT8V)0x4000380C)) // RW, UART2 divisor latch LSB byte
|
|
#define R8_UART2_DLM (*((PUINT8V)0x4000380D)) // RW, UART2 divisor latch MSB byte
|
|
#define R8_UART2_DIV (*((PUINT8V)0x4000380E)) // RW, UART2 pre-divisor latch byte, only low 7 bit, from 1 to 0/128
|
|
|
|
/* UART3 register */
|
|
#define R32_UART3_CTRL (*((PUINT32V)0x40003C00)) // RW, UART3 control
|
|
#define R8_UART3_MCR (*((PUINT8V)0x40003C00)) // RW, UART3 modem control
|
|
#define R8_UART3_IER (*((PUINT8V)0x40003C01)) // RW, UART3 interrupt enable
|
|
#define R8_UART3_FCR (*((PUINT8V)0x40003C02)) // RW, UART3 FIFO control
|
|
#define R8_UART3_LCR (*((PUINT8V)0x40003C03)) // RW, UART3 line control
|
|
#define R32_UART3_STAT (*((PUINT32V)0x40003C04)) // RO, UART3 status
|
|
#define R8_UART3_IIR (*((PUINT8V)0x40003C04)) // RO, UART3 interrupt identification
|
|
#define R8_UART3_LSR (*((PUINT8V)0x40003C05)) // RO, UART3 line status
|
|
#define R32_UART3_FIFO (*((PUINT32V)0x40003C08)) // RW, UART3 data or FIFO port
|
|
#define R8_UART3_RBR (*((PUINT8V)0x40003C08)) // RO, UART3 receiver buffer, receiving byte
|
|
#define R8_UART3_THR (*((PUINT8V)0x40003C08)) // WO, UART3 transmitter holding, transmittal byte
|
|
#define R8_UART3_RFC (*((PUINT8V)0x40003C0A)) // RO, UART3 receiver FIFO count
|
|
#define R8_UART3_TFC (*((PUINT8V)0x40003C0B)) // RO, UART3 transmitter FIFO count
|
|
#define R32_UART3_SETUP (*((PUINT32V)0x40003C0C)) // RW, UART3 setup
|
|
#define R16_UART3_DL (*((PUINT16V)0x40003C0C)) // RW, UART3 divisor latch
|
|
#define R8_UART3_DLL (*((PUINT8V)0x40003C0C)) // RW, UART3 divisor latch LSB byte
|
|
#define R8_UART3_DLM (*((PUINT8V)0x40003C0D)) // RW, UART3 divisor latch MSB byte
|
|
#define R8_UART3_DIV (*((PUINT8V)0x40003C0E)) // RW, UART3 pre-divisor latch byte, only low 7 bit, from 1 to 0/128
|
|
|
|
/* UART register address offset and bit define */
|
|
#define UART_FIFO_SIZE 8 // UART FIFO size (depth)
|
|
#define UART_RECV_RDY_SZ 7 // the max FIFO trigger level for UART receiver data available
|
|
#define BA_UART0 ((PUINT8V)0x40003000) // point UART0 base address
|
|
#define BA_UART1 ((PUINT8V)0x40003400) // point UART1 base address
|
|
#define BA_UART2 ((PUINT8V)0x40003800) // point UART2 base address
|
|
#define BA_UART3 ((PUINT8V)0x40003C00) // point UART3 base address
|
|
#define UART_MCR 0
|
|
#define RB_MCR_DTR 0x01 // RW, UART0 control DTR
|
|
#define RB_MCR_RTS 0x02 // RW, UART0 control RTS
|
|
#define RB_MCR_OUT1 0x04 // RW, UART0 control OUT1
|
|
#define RB_MCR_OUT2 0x08 // RW, UART control OUT2
|
|
#define RB_MCR_INT_OE 0x08 // RW, UART interrupt output enable
|
|
#define RB_MCR_LOOP 0x10 // RW, UART0 enable local loop back
|
|
#define RB_MCR_AU_FLOW_EN 0x20 // RW, UART0 enable autoflow control
|
|
#define RB_MCR_TNOW 0x40 // RW, UART0 enable TNOW output on DTR pin
|
|
#define RB_MCR_HALF 0x80 // RW, UART0 enable half-duplex
|
|
#define UART_IER 1
|
|
#define RB_IER_RECV_RDY 0x01 // RW, UART interrupt enable for receiver data ready
|
|
#define RB_IER_THR_EMPTY 0x02 // RW, UART interrupt enable for THR empty
|
|
#define RB_IER_LINE_STAT 0x04 // RW, UART interrupt enable for receiver line status
|
|
#define RB_IER_MODEM_CHG 0x08 // RW, UART0 interrupt enable for modem status change
|
|
#define RB_IER_DTR_EN 0x10 // RW, UART0 DTR/TNOW output pin enable
|
|
#define RB_IER_RTS_EN 0x20 // RW, UART0 RTS output pin enable
|
|
#define RB_IER_TXD_EN 0x40 // RW, UART TXD pin enable
|
|
#define RB_IER_RESET 0x80 // WZ, UART software reset control, high action, auto clear
|
|
#define UART_FCR 2
|
|
#define RB_FCR_FIFO_EN 0x01 // RW, UART FIFO enable
|
|
#define RB_FCR_RX_FIFO_CLR 0x02 // WZ, clear UART receiver FIFO, high action, auto clear
|
|
#define RB_FCR_TX_FIFO_CLR 0x04 // WZ, clear UART transmitter FIFO, high action, auto clear
|
|
#define RB_FCR_FIFO_TRIG 0xC0 // RW, UART receiver FIFO trigger level: 00-1byte, 01-2bytes, 10-4bytes, 11-7bytes
|
|
#define UART_LCR 3
|
|
#define RB_LCR_WORD_SZ 0x03 // RW, UART word bit length: 00-5bit, 01-6bit, 10-7bit, 11-8bit
|
|
#define RB_LCR_STOP_BIT 0x04 // RW, UART stop bit length: 0-1bit, 1-2bit
|
|
#define RB_LCR_PAR_EN 0x08 // RW, UART parity enable
|
|
#define RB_LCR_PAR_MOD 0x30 // RW, UART parity mode: 00-odd, 01-even, 10-mark, 11-space
|
|
#define RB_LCR_BREAK_EN 0x40 // RW, UART break control enable
|
|
#define RB_LCR_DLAB 0x80 // RW, UART reserved bit
|
|
#define RB_LCR_GP_BIT 0x80 // RW, UART general purpose bit
|
|
#define UART_IIR 4
|
|
#define RB_IIR_NO_INT 0x01 // RO, UART no interrupt flag: 0=interrupt action, 1=no interrupt
|
|
#define RB_IIR_INT_MASK 0x0F // RO, UART interrupt flag bit mask
|
|
#define RB_IIR_FIFO_ID 0xC0 // RO, UART FIFO enabled flag
|
|
#define UART_LSR 5
|
|
#define RB_LSR_DATA_RDY 0x01 // RO, UART receiver fifo data ready status
|
|
#define RB_LSR_OVER_ERR 0x02 // RZ, UART receiver overrun error
|
|
#define RB_LSR_PAR_ERR 0x04 // RZ, UART receiver parity error
|
|
#define RB_LSR_FRAME_ERR 0x08 // RZ, UART receiver frame error
|
|
#define RB_LSR_BREAK_ERR 0x10 // RZ, UART receiver break error
|
|
#define RB_LSR_TX_FIFO_EMP 0x20 // RO, UART transmitter fifo empty status
|
|
#define RB_LSR_TX_ALL_EMP 0x40 // RO, UART transmitter all empty status
|
|
#define RB_LSR_ERR_RX_FIFO 0x80 // RO, indicate error in UART receiver fifo
|
|
#define UART_MSR 6
|
|
#define RB_MSR_CTS_CHG 0x01 // RZ, UART0 CTS changed status, high action
|
|
#define RB_MSR_DSR_CHG 0x02 // RZ, UART0 DSR changed status, high action
|
|
//#define RB_MSR_RI_CHG 0x04 // RZ, UART0 RI changed status, high action
|
|
//#define RB_MSR_DCD_CHG 0x08 // RZ, UART0 DCD changed status, high action
|
|
#define RB_MSR_CTS 0x10 // RO, UART0 CTS action status
|
|
#define RB_MSR_DSR 0x20 // RO, UART0 DSR action status
|
|
//#define RB_MSR_RI 0x40 // RO, UART0 RI action status
|
|
//#define RB_MSR_DCD 0x80 // RO, UART0 DCD action status
|
|
#define UART_RBR 8
|
|
#define UART_THR 8
|
|
#define UART_RFC 0x0A
|
|
#define UART_TFC 0x0B
|
|
#define UART_DLL 0x0C
|
|
#define UART_DLM 0x0D
|
|
#define UART_DIV 0x0E
|
|
#define UART_ADR 0x0F
|
|
|
|
/* UART interrupt identification values for IIR bits 3:0 */
|
|
#define UART_II_SLV_ADDR 0x0E // RO, UART0 slave address match
|
|
#define UART_II_LINE_STAT 0x06 // RO, UART interrupt by receiver line status
|
|
#define UART_II_RECV_RDY 0x04 // RO, UART interrupt by receiver data available
|
|
#define UART_II_RECV_TOUT 0x0C // RO, UART interrupt by receiver fifo timeout
|
|
#define UART_II_THR_EMPTY 0x02 // RO, UART interrupt by THR empty
|
|
#define UART_II_MODEM_CHG 0x00 // RO, UART0 interrupt by modem status change
|
|
#define UART_II_NO_INTER 0x01 // RO, no UART interrupt is pending
|
|
|
|
/* SPI0 register */
|
|
#define R32_SPI0_CONTROL (*((PUINT32V)0x40004000)) // RW, SPI0 control
|
|
#define R8_SPI0_CTRL_MOD (*((PUINT8V)0x40004000)) // RW, SPI0 mode control
|
|
#define R8_SPI0_CTRL_CFG (*((PUINT8V)0x40004001)) // RW, SPI0 configuration control
|
|
#define R8_SPI0_INTER_EN (*((PUINT8V)0x40004002)) // RW, SPI0 interrupt enable
|
|
#define R8_SPI0_CLOCK_DIV (*((PUINT8V)0x40004003)) // RW, SPI0 master clock divisor
|
|
#define R8_SPI0_SLAVE_PRE (*((PUINT8V)0x40004003)) // RW, SPI0 slave preset value
|
|
#define R32_SPI0_STATUS (*((PUINT32V)0x40004004)) // RW, SPI0 status
|
|
#define R8_SPI0_BUFFER (*((PUINT8V)0x40004004)) // RO, SPI0 data buffer
|
|
#define R8_SPI0_RUN_FLAG (*((PUINT8V)0x40004005)) // RO, SPI0 work flag
|
|
#define R8_SPI0_INT_FLAG (*((PUINT8V)0x40004006)) // RW1, SPI0 interrupt flag
|
|
#define R8_SPI0_FIFO_COUNT (*((PUINT8V)0x40004007)) // RO, SPI0 FIFO count status
|
|
#define R32_SPI0_TOTAL_CNT (*((PUINT32V)0x4000400C)) // RW, SPI0 total byte count, only low 12 bit
|
|
#define R16_SPI0_TOTAL_CNT (*((PUINT16V)0x4000400C)) // RW, SPI0 total byte count, only low 12 bit
|
|
#define R32_SPI0_FIFO (*((PUINT32V)0x40004010)) // RW, SPI0 FIFO register
|
|
#define R8_SPI0_FIFO (*((PUINT8V)0x40004010)) // RO/WO, SPI0 FIFO register
|
|
#define R8_SPI0_FIFO_COUNT1 (*((PUINT8V)0x40004013)) // RO, SPI0 FIFO count status
|
|
#define R32_SPI0_DMA_NOW (*((PUINT32V)0x40004014)) // RW, SPI0 DMA current address
|
|
#define R16_SPI0_DMA_NOW (*((PUINT16V)0x40004014)) // RW, SPI0 DMA current address
|
|
#define R32_SPI0_DMA_BEG (*((PUINT32V)0x40004018)) // RW, SPI0 DMA begin address
|
|
#define R16_SPI0_DMA_BEG (*((PUINT16V)0x40004018)) // RW, SPI0 DMA begin address
|
|
#define R32_SPI0_DMA_END (*((PUINT32V)0x4000401C)) // RW, SPI0 DMA end address
|
|
#define R16_SPI0_DMA_END (*((PUINT16V)0x4000401C)) // RW, SPI0 DMA end address
|
|
|
|
/* SPI1 register */
|
|
#define R32_SPI1_CONTROL (*((PUINT32V)0x40004400)) // RW, SPI1 control
|
|
#define R8_SPI1_CTRL_MOD (*((PUINT8V)0x40004400)) // RW, SPI1 mode control
|
|
#define R8_SPI1_CTRL_CFG (*((PUINT8V)0x40004401)) // RW, SPI1 configuration control
|
|
#define R8_SPI1_INTER_EN (*((PUINT8V)0x40004402)) // RW, SPI1 interrupt enable
|
|
#define R8_SPI1_CLOCK_DIV (*((PUINT8V)0x40004403)) // RW, SPI1 master clock divisor
|
|
#define R32_SPI1_STATUS (*((PUINT32V)0x40004404)) // RW, SPI1 status
|
|
#define R8_SPI1_BUFFER (*((PUINT8V)0x40004404)) // RO, SPI1 data buffer
|
|
#define R8_SPI1_RUN_FLAG (*((PUINT8V)0x40004405)) // RO, SPI1 work flag
|
|
#define R8_SPI1_INT_FLAG (*((PUINT8V)0x40004406)) // RW1, SPI1 interrupt flag
|
|
#define R8_SPI1_FIFO_COUNT (*((PUINT8V)0x40004407)) // RO, SPI1 FIFO count status
|
|
#define R32_SPI1_TOTAL_CNT (*((PUINT32V)0x4000440C)) // RW, SPI1 total byte count, only low 12 bit
|
|
#define R16_SPI1_TOTAL_CNT (*((PUINT16V)0x4000440C)) // RW, SPI1 total byte count, only low 12 bit
|
|
#define R32_SPI1_FIFO (*((PUINT32V)0x40004410)) // RW, SPI1 FIFO register
|
|
#define R8_SPI1_FIFO (*((PUINT8V)0x40004410)) // RO/WO, SPI1 FIFO register
|
|
#define R8_SPI1_FIFO_COUNT1 (*((PUINT8V)0x40004413)) // RO, SPI1 FIFO count status
|
|
|
|
/* SPI register address offset and bit define */
|
|
#define SPI_FIFO_SIZE 8 // SPI FIFO size (depth)
|
|
#define BA_SPI0 ((PUINT8V)0x40004000) // point SPI0 base address
|
|
#define BA_SPI1 ((PUINT8V)0x40004400) // point SPI1 base address
|
|
#define SPI_CTRL_MOD 0
|
|
#define RB_SPI_MODE_SLAVE 0x01 // RW, SPI0 slave mode: 0=master/host, 1=slave/device
|
|
#define RB_SPI_ALL_CLEAR 0x02 // RW, force clear SPI FIFO and count
|
|
#define RB_SPI_2WIRE_MOD 0x04 // RW, SPI0 enable 2 wire mode for slave: 0=3wire(SCK0,MOSI,MISO), 1=2wire(SCK0,MISO=MXSX)
|
|
#define RB_SPI_MST_SCK_MOD 0x08 // RW, SPI master clock mode: 0=mode 0, 1=mode 3
|
|
#define RB_SPI_SLV_CMD_MOD 0x08 // RW, SPI0 slave command mode: 0=byte stream, 1=first byte command
|
|
#define RB_SPI_FIFO_DIR 0x10 // RW, SPI FIFO direction: 0=out(write @master mode), 1=in(read @master mode)
|
|
#define RB_SPI_SCK_OE 0x20 // RW, SPI SCK output enable
|
|
#define RB_SPI_MOSI_OE 0x40 // RW, SPI MOSI output enable
|
|
#define RB_SPI1_SDO_OE 0x40 // RW, SPI1 SDO output enable
|
|
#define RB_SPI_MISO_OE 0x80 // RW, SPI MISO output enable
|
|
#define RB_SPI1_SDI_OE 0x80 // RW, SPI1 SDI output enable, SPI1 enable 2 wire mode: 0=3wire(SCK1,SDO,SDI), 1=2wire(SCK1,SDI=SDX)
|
|
#define SPI_CTRL_CFG 1
|
|
#define RB_SPI_DMA_ENABLE 0x01 // RW, SPI0 DMA enable
|
|
#define RB_SPI_DMA_LOOP 0x04 // RW, SPI0 DMA address loop enable
|
|
#define RB_SPI_AUTO_IF 0x10 // RW, enable buffer/FIFO accessing to auto clear RB_SPI_IF_BYTE_END interrupt flag
|
|
#define RB_SPI_BIT_ORDER 0x20 // RW, SPI bit data order: 0=MSB first, 1=LSB first
|
|
#define RB_SPI_MST_DLY_EN 0x40 // RW, SPI master input delay enable
|
|
#define SPI_INTER_EN 2
|
|
#define RB_SPI_IE_CNT_END 0x01 // RW, enable interrupt for SPI total byte count end
|
|
#define RB_SPI_IE_BYTE_END 0x02 // RW, enable interrupt for SPI byte exchanged
|
|
#define RB_SPI_IE_FIFO_HF 0x04 // RW, enable interrupt for SPI FIFO half
|
|
#define RB_SPI_IE_DMA_END 0x08 // RW, enable interrupt for SPI0 DMA completion
|
|
#define RB_SPI_IE_FIFO_OV 0x10 // RW, enable interrupt for SPI0 FIFO overflow
|
|
#define RB_SPI_IE_FST_BYTE 0x80 // RW, enable interrupt for SPI0 slave mode first byte received
|
|
#define SPI_CLOCK_DIV 3
|
|
#define SPI_SLAVE_PRESET 3
|
|
#define SPI_BUFFER 4
|
|
#define SPI_RUN_FLAG 5
|
|
#define RB_SPI_SLV_CMD_ACT 0x10 // RO, SPI0 slave first byte / command flag
|
|
#define RB_SPI_FIFO_READY 0x20 // RO, SPI FIFO ready status
|
|
#define RB_SPI_SLV_CS_LOAD 0x40 // RO, SPI0 slave chip-select loading status
|
|
#define RB_SPI_SLV_SELECT 0x80 // RO, SPI0 slave selection status
|
|
#define SPI_INT_FLAG 6
|
|
#define RB_SPI_IF_CNT_END 0x01 // RW1, interrupt flag for SPI total byte count end
|
|
#define RB_SPI_IF_BYTE_END 0x02 // RW1, interrupt flag for SPI byte exchanged
|
|
#define RB_SPI_IF_FIFO_HF 0x04 // RW1, interrupt flag for SPI FIFO half (RB_SPI_FIFO_DIR ? >=4bytes : <4bytes)
|
|
#define RB_SPI_IF_DMA_END 0x08 // RW1, interrupt flag for SPI0 DMA completion
|
|
#define RB_SPI_IF_FIFO_OV 0x10 // RW1, interrupt flag for SPI0 FIFO overflow
|
|
#define RB_SPI_FREE 0x40 // RO, current SPI free status
|
|
#define RB_SPI_IF_FST_BYTE 0x80 // RW1, interrupt flag for SPI0 slave mode first byte received
|
|
#define SPI_FIFO_COUNT 7
|
|
#define SPI_TOTAL_CNT 0x0C
|
|
#define SPI_FIFO 0x10
|
|
#define SPI_DMA_NOW 0x14
|
|
#define SPI_DMA_BEG 0x18
|
|
#define SPI_DMA_END 0x1C
|
|
|
|
/* I2C register */
|
|
#define R16_I2C_CTRL1 (*((PUINT16V)0x40004800)) // RW, I2C control 1
|
|
#define R16_I2C_CTRL2 (*((PUINT16V)0x40004804)) // RW, I2C control 2
|
|
#define R16_I2C_OADDR1 (*((PUINT16V)0x40004808)) // RW, I2C own address register 1
|
|
#define R16_I2C_OADDR2 (*((PUINT16V)0x4000480C)) // RW, I2C own address register 2
|
|
#define R16_I2C_DATAR (*((PUINT16V)0x40004810)) // RW, I2C data register
|
|
#define R16_I2C_STAR1 (*((PUINT16V)0x40004814)) // R0, I2C stauts register 1
|
|
#define R16_I2C_STAR2 (*((PUINT16V)0x40004818)) // R0, I2C status register 2
|
|
#define R8_I2C_PEC (*((PUINT8V) 0x40004819)) // R0, I2C Packet error checking register
|
|
#define R16_I2C_CKCFGR (*((PUINT16V)0x4000481C)) // RW, I2C clock control register
|
|
#define R16_I2C_RTR (*((PUINT16V)0x40004820)) // RW, I2C trise register
|
|
|
|
/* I2C register address offset and bit define */
|
|
#define BA_I2C ((PUINT8V)0x40004800) // point I2C base address
|
|
#define I2C_CTRL1 0
|
|
#define RB_I2C_PE 0x0001 // RW, Peripheral enable
|
|
#define RB_I2C_SMBUS 0x0002 // RW, SMBUS mode: 0=I2C mode, 1=SMBUS mode
|
|
#define RB_I2C_SMBTYPE 0x0008 // RW, SMBus type: 0=Device, 1=Host
|
|
#define RB_I2C_EBARP 0x0010 // RW, ARP enable
|
|
#define RB_I2C_ENPEC 0x0020 // RW, PEC ebable
|
|
#define RB_I2C_ENGC 0x0040 // RW, General call enable
|
|
#define RB_I2C_NOSTRETCH 0x0080 // RW, Clock stretching disable (Slave mode)
|
|
#define RB_I2C_START 0x0100 // RW, Start generation: master mode: 0=no start, 1=repeated start; slave mode: 0=no start, 1=start at bus free
|
|
#define RB_I2C_STOP 0x0200 // RW, Stop generation: master mode: 0=no stop, 1=stop after the current byte transfer or after the current Start condition is sent; slave mode: 0=no stop, 1=Release the SCL and SDA lines after the current byte transfer
|
|
#define RB_I2C_ACK 0x0400 // RW, Acknowledge enable
|
|
#define RB_I2C_POS 0x0800 // RW, Acknowledge/PEC Position (for data reception)
|
|
#define RB_I2C_PEC 0x1000 // RW, Packet error checking: 0=No PEC transfer, 1=PEC transfer (in Tx or Rx mode)
|
|
#define RB_I2C_ALERT 0x2000 // RW, SMBus alert: 0=Releases SMBA pin high, 1=Drives SMBA pin low.
|
|
#define RB_I2C_SWRST 0x8000 // RW, Software reset
|
|
#define I2C_CTRL2 4
|
|
#define RB_I2C_FREQ 0x003F // RW, Peripheral clock frequency, The minimum allowed frequency is 2 MHz,the maximum frequency is 36 MHz
|
|
#define RB_I2C_ITERREN 0x0100 // RW, Error interrupt enable
|
|
#define RB_I2C_ITEVTEN 0x0200 // RW, Event interrupt enable
|
|
#define RB_I2C_ITBUFEN 0x0400 // RW, Buffer interrupt enable
|
|
#define I2C_OADDR1 8
|
|
#define RB_I2C_ADD0 0x0001 // RW, bit0 of address in 10-bit addressing mode
|
|
#define RB_I2C_ADD7_1 0x00FE // RW, bit[7:1] of address
|
|
#define RB_I2C_ADD9_8 0x0300 // RW, bit[9:8] of address in 10-bit addressing mode
|
|
#define RB_I2C_MUST1 0x4000 // RW, Should always be kept at 1
|
|
#define RB_I2C_ADDMODE 0x8000 // RW, Addressing mode (slave mode): 0=7-bit slave address, 1=10-bit slave address
|
|
#define I2C_OADDR2 12
|
|
#define RB_I2C_ENDUAL 0x0001 // RW, Dual addressing mode enable
|
|
#define RB_I2C_ADD2 0x00FE // RW, bit[7:1] of address2
|
|
#define I2C_DATAR 16
|
|
#define I2C_STAR1 20
|
|
#define RB_I2C_SB 0x0001 // RW0, Start bit flag (Master mode)
|
|
#define RB_I2C_ADDR 0x0002 // RW0, Address sent (master mode)/matched (slave mode) flag
|
|
#define RB_I2C_BTF 0x0004 // RO, Byte transfer finished flag
|
|
#define RB_I2C_ADD10 0x0008 // RO, 10-bit header sent flag (Master mode)
|
|
#define RB_I2C_STOPF 0x0010 // RO, Stop detection flag (slave mode)
|
|
#define RB_I2C_RxNE 0x0040 // RO, Data register not empty flag (receivers)
|
|
#define RB_I2C_TxE 0x0080 // RO, Data register empty flag (transmitters)
|
|
#define RB_I2C_BERR 0x0100 // RW0, Bus error flag
|
|
#define RB_I2C_ARLO 0x0200 // RW0, Arbitration lost flag (master mode)
|
|
#define RB_I2C_AF 0x0400 // RW0, Acknowledge failure flag
|
|
#define RB_I2C_OVR 0x0800 // RW0, Overrun/Underrun flag
|
|
#define RB_I2C_PECERR 0x1000 // RW0, PEC Error flag in reception
|
|
#define RB_I2C_TIMEOUT 0x4000 // RW0, Timeout or Tlow error flag
|
|
#define RB_I2C_SMBALERT 0x8000 // RW0, SMBus alert flag
|
|
#define I2C_STAR2 24
|
|
#define RB_I2C_MSL 0x0001 // RO, Mode statu: 0=Slave mode, 1=Master mode
|
|
#define RB_I2C_BUSY 0x0002 // RO, Bus busy flag
|
|
#define RB_I2C_TRA 0x0004 // RO, Trans flag: 0=data bytes received, 1=data bytes transmitted
|
|
#define RB_I2C_GENCALL 0x0010 // RO, General call address (Slave mode) received flag
|
|
#define RB_I2C_SMBDEFAULT 0x0020 // RO, SMBus device default address (Slave mode) received flag
|
|
#define RB_I2C_SMBHOST 0x0040 // RO, SMBus host header (Slave mode) received flag
|
|
#define RB_I2C_DUALF 0x0080 // RO, Dual flag (Slave mode): 0=Received address matched with OAR1, 1=Received address matched with OAR2
|
|
#define RB_I2C_PECX 0xFF00 // RO, Packet error checking register
|
|
#define I2C_CKCFGR 28
|
|
#define RB_I2C_CCR 0x0FFF // RW, Controls the SCL clock in Fm/Sm mode (Master mode)
|
|
#define RB_I2C_DUTY 0x4000 // RW, Fm mode duty cycle: 0=L/H=2, 1=L/H=16/9
|
|
#define RB_I2C_F_S 0x8000 // RW, I2C master mode selection: 0=standard mode, 1=fast mode
|
|
#define I2C_RTR 32
|
|
#define RB_I2C_TRISE 0x003F // RW, Maximum rise time in Fm/Sm mode (Master mode)
|
|
|
|
/* PWM4/5/6/7/8/9/10/11 register */
|
|
#define R32_PWM_CONTROL (*((PUINT32V)0x40005000)) // RW, PWM control
|
|
#define R8_PWM_OUT_EN (*((PUINT8V)0x40005000)) // RW, PWM output enable control
|
|
#define R8_PWM_POLAR (*((PUINT8V)0x40005001)) // RW, PWM output polarity control
|
|
#define R8_PWM_CONFIG (*((PUINT8V)0x40005002)) // RW, PWM configuration
|
|
#define R8_PWM_CLOCK_DIV (*((PUINT8V)0x40005003)) // RW, PWM clock divisor
|
|
#define R32_PWM4_7_DATA (*((PUINT32V)0x40005004)) // RW, PWM4-7 data holding
|
|
#define R8_PWM4_DATA (*((PUINT8V)0x40005004)) // RW, PWM4 data holding
|
|
#define R8_PWM5_DATA (*((PUINT8V)0x40005005)) // RW, PWM5 data holding
|
|
#define R8_PWM6_DATA (*((PUINT8V)0x40005006)) // RW, PWM6 data holding
|
|
#define R8_PWM7_DATA (*((PUINT8V)0x40005007)) // RW, PWM7 data holding
|
|
#define R32_PWM8_11_DATA (*((PUINT32V)0x40005008)) // RW, PWM8-11 data holding
|
|
#define R8_PWM8_DATA (*((PUINT8V)0x40005008)) // RW, PWM8 data holding
|
|
#define R8_PWM9_DATA (*((PUINT8V)0x40005009)) // RW, PWM9 data holding
|
|
#define R8_PWM10_DATA (*((PUINT8V)0x4000500A)) // RW, PWM10 data holding
|
|
#define R8_PWM11_DATA (*((PUINT8V)0x4000500B)) // RW, PWM11 data holding
|
|
#define R8_PWM_INT_CTRL (*((PUINT32V)0x4000500C)) // RW, PWM interrupt control
|
|
#define RB_PWM_IE_CYC 0x01 // RW, enable interrupt for PWM cycle end
|
|
#define RB_PWM_CYC_PRE 0x02 // RW, select PWM cycle interrupt point: 0=after count 0xFE (0x7E for 7 bits mode...), 1=after count 0xF0 (0x70 for 7 bits mode...)
|
|
#define RB_PWM_IF_CYC 0x80 // RW1, interrupt flag for PWM cycle end
|
|
|
|
/* PWM4/5/6/7/8/9/10/11 register address offset and bit define */
|
|
#define BA_PWMX ((PUINT8V)0x40005000) // point PWM4/5/6/7/8/9/10/11 base address
|
|
#define PWM_OUT_EN 0
|
|
#define RB_PWM4_OUT_EN 0x01 // RW, PWM4 output enable
|
|
#define RB_PWM5_OUT_EN 0x02 // RW, PWM5 output enable
|
|
#define RB_PWM6_OUT_EN 0x04 // RW, PWM6 output enable
|
|
#define RB_PWM7_OUT_EN 0x08 // RW, PWM7 output enable
|
|
#define RB_PWM8_OUT_EN 0x10 // RW, PWM8 output enable
|
|
#define RB_PWM9_OUT_EN 0x20 // RW, PWM9 output enable
|
|
#define RB_PWM10_OUT_EN 0x40 // RW, PWM10 output enable
|
|
#define RB_PWM11_OUT_EN 0x80 // RW, PWM11 output enable
|
|
#define PWM_POLAR 1
|
|
#define RB_PWM4_POLAR 0x01 // RW, PWM4 output polarity: 0=default low and high action, 1=default high and low action
|
|
#define RB_PWM5_POLAR 0x02 // RW, PWM5 output polarity: 0=default low and high action, 1=default high and low action
|
|
#define RB_PWM6_POLAR 0x04 // RW, PWM6 output polarity: 0=default low and high action, 1=default high and low action
|
|
#define RB_PWM7_POLAR 0x08 // RW, PWM7 output polarity: 0=default low and high action, 1=default high and low action
|
|
#define RB_PWM8_POLAR 0x10 // RW, PWM8 output polarity: 0=default low and high action, 1=default high and low action
|
|
#define RB_PWM9_POLAR 0x20 // RW, PWM9 output polarity: 0=default low and high action, 1=default high and low action
|
|
#define RB_PWM10_POLAR 0x40 // RW, PWM10 output polarity: 0=default low and high action, 1=default high and low action
|
|
#define RB_PWM11_POLAR 0x80 // RW, PWM11 output polarity: 0=default low and high action, 1=default high and low action
|
|
#define PWM_CONFIG 2
|
|
#define RB_PWM_CYCLE_SEL 0x01 // RW, PWM cycle selection: 0=256/128/64/32 clocks, 1=255/127/63/31 clocks
|
|
#define RB_PWM_STAG_ST 0x02 // RO, PWM stagger cycle status
|
|
#define RB_PWM_CYC_MOD 0x0C // RW, PWM data width mode: 00=8 bits data, 01=7 bits data, 10=6 bits data, 11=5 bits data
|
|
#define RB_PWM4_5_STAG_EN 0x10 // RW, PWM4/5 stagger output enable: 0=independent output, 1=stagger output
|
|
#define RB_PWM6_7_STAG_EN 0x20 // RW, PWM6/7 stagger output enable: 0=independent output, 1=stagger output
|
|
#define RB_PWM8_9_STAG_EN 0x40 // RW, PWM8/9 stagger output enable: 0=independent output, 1=stagger output
|
|
#define RB_PWM10_11_STAG_EN 0x80 // RW, PWM10/11 stagger output enable: 0=independent output, 1=stagger output
|
|
#define PWM_CLOCK_DIV 3
|
|
#define PWM4_DATA_HOLD 4
|
|
#define PWM5_DATA_HOLD 5
|
|
#define PWM6_DATA_HOLD 6
|
|
#define PWM7_DATA_HOLD 7
|
|
#define PWM8_DATA_HOLD 8
|
|
#define PWM9_DATA_HOLD 9
|
|
#define PWM10_DATA_HOLD 10
|
|
#define PWM11_DATA_HOLD 11
|
|
|
|
/* Address space define */
|
|
#define BA_CODE ((PUINT32)0x00000000) // point code base address
|
|
#define SZ_CODE 0x00080000 // code size
|
|
#define BA_SFR ((PUINT32)0x40000000) // point SFR base address
|
|
#define SZ_SFR 0x00010000 // SFR size
|
|
#define BA_RAM ((PUINT32)0x20000000) // point RAM base address
|
|
#define SZ_RAM 0x00008000 // RAM size
|
|
|
|
/* Special Program Space */
|
|
#define DATA_FLASH_ADDR 0x70000 // start address of Data-Flash
|
|
#define DATA_FLASH_SIZE 0x8000 // size of Data-Flash
|
|
#define BOOT_LOAD_ADDR 0x78000 // start address of boot loader program
|
|
#define BOOT_LOAD_SIZE 0x6000 // size of boot loader program
|
|
#define BOOT_LOAD_CFG 0x7E000 // start address of configuration information for boot loader program
|
|
#define ROM_CFG_ADDR 0x7F000 // chip configuration information address
|
|
|
|
/*----- Reference Information --------------------------------------------*/
|
|
#define ID_CH583 0x83 // chip ID
|
|
#define ID_CH582 0x82 // chip ID
|
|
#define ID_CH581 0x81 // chip ID
|
|
|
|
/* Interrupt routine address and interrupt number */
|
|
#define INT_ID_TMR0 16 // interrupt number for Timer0
|
|
#define INT_ID_GPIO_A 17 // interrupt number for GPIO port A
|
|
#define INT_ID_GPIO_B 18 // interrupt number for GPIO port B
|
|
#define INT_ID_SPI0 19 // interrupt number for SPI0
|
|
#define INT_ID_BLEB 20 // interrupt number for BLEBB
|
|
#define INT_ID_BLEL 21 // interrupt number for BLELLE
|
|
#define INT_ID_USB 22 // interrupt number for USB
|
|
#define INT_ID_USB2 23 // interrupt number for USB2
|
|
#define INT_ID_TMR1 24 // interrupt number for Timer1
|
|
#define INT_ID_TMR2 25 // interrupt number for Timer2
|
|
#define INT_ID_UART0 26 // interrupt number for UART0
|
|
#define INT_ID_UART1 27 // interrupt number for UART1
|
|
#define INT_ID_RTC 28 // interrupt number for RTC
|
|
#define INT_ID_ADC 29 // interrupt number for ADC and TouchKey
|
|
#define INT_ID_I2C 30 // interrupt number for I2C
|
|
#define INT_ID_PWMX_SPI1 31 // interrupt number for PWM4~11 and SPI1
|
|
#define INT_ID_TMR3 32 // interrupt number for Timer3
|
|
#define INT_ID_UART2 33 // interrupt number for UART2
|
|
#define INT_ID_UART3 34 // interrupt number for UART3
|
|
#define INT_ID_WDOG_BAT 35 // interrupt number for Watch-Dog timer and Battery low voltage
|
|
#define INT_VEC_ENTRY_SZ 4 // size of each interrupt vector entry
|
|
#define INT_ADDR_TMR0 (INT_ID_TMR0*INT_VEC_ENTRY_SZ) // interrupt vector address for Timer0
|
|
#define INT_ADDR_GPIO_A (INT_ID_GPIO_A*INT_VEC_ENTRY_SZ) // interrupt vector address for GPIO port A
|
|
#define INT_ADDR_GPIO_B (INT_ID_GPIO_B*INT_VEC_ENTRY_SZ) // interrupt vector address for GPIO port B
|
|
#define INT_ADDR_SPI0 (INT_ID_SPI0*INT_VEC_ENTRY_SZ) // interrupt vector address for SPI0
|
|
#define INT_ADDR_BLEB (INT_ID_BLEB*INT_VEC_ENTRY_SZ) // interrupt vector address for BLEBB
|
|
#define INT_ADDR_BLEL (INT_ID_BLEL*INT_VEC_ENTRY_SZ) // interrupt vector address for BLELLE
|
|
#define INT_ADDR_USB (INT_ID_USB*INT_VEC_ENTRY_SZ) // interrupt vector address for USB
|
|
#define INT_ADDR_USB2 (INT_ID_USB2*INT_VEC_ENTRY_SZ) // interrupt vector address for USB2
|
|
#define INT_ADDR_TMR1 (INT_ID_TMR1*INT_VEC_ENTRY_SZ) // interrupt vector address for Timer1
|
|
#define INT_ADDR_TMR2 (INT_ID_TMR2*INT_VEC_ENTRY_SZ) // interrupt vector address for Timer2
|
|
#define INT_ADDR_UART0 (INT_ID_UART0*INT_VEC_ENTRY_SZ) // interrupt vector address for UART0
|
|
#define INT_ADDR_UART1 (INT_ID_UART1*INT_VEC_ENTRY_SZ) // interrupt vector address for UART1
|
|
#define INT_ADDR_RTC (INT_ID_RTC*INT_VEC_ENTRY_SZ) // interrupt vector address for RTC
|
|
#define INT_ADDR_ADC (INT_ID_ADC*INT_VEC_ENTRY_SZ) // interrupt vector address for ADC and TouchKey
|
|
#define INT_ADDR_I2C (INT_ID_I2C*INT_VEC_ENTRY_SZ) // interrupt vector address for I2C
|
|
#define INT_ADDR_PWMX_SPI1 (INT_ID_PWMX_SPI1*INT_VEC_ENTRY_SZ) // interrupt vector address for PWM4~11 and SPI1
|
|
#define INT_ADDR_TMR3 (INT_ID_TMR3*INT_VEC_ENTRY_SZ) // interrupt vector address for Timer3
|
|
#define INT_ADDR_UART2 (INT_ID_UART2*INT_VEC_ENTRY_SZ) // interrupt vector address for UART2
|
|
#define INT_ADDR_UART3 (INT_ID_UART3*INT_VEC_ENTRY_SZ) // interrupt vector address for UART3
|
|
#define INT_ADDR_WDOG_BAT (INT_ID_WDOG_BAT*INT_VEC_ENTRY_SZ) // interrupt vector address for Watch-Dog timer and Battery low voltage
|
|
|
|
#ifndef TABLE_IRQN
|
|
#define __PFIC_PRIO_BITS 2 /*!< uses 8 Bits for the Priority Levels */
|
|
#define __Vendor_SysTickConfig 0 /*!< Set to 1 if different SysTick Config is used */
|
|
typedef enum IRQn
|
|
{
|
|
Reset_IRQn = 1,
|
|
NMI_IRQn = 2, /*!< Non Maskable Interrupt */
|
|
EXC_IRQn = 3, /*!< Exceptions Interrupt */
|
|
SysTick_IRQn = 12, /*!< System timer Interrupt */
|
|
SWI_IRQn = 14, /*!< software Interrupt */
|
|
TMR0_IRQn = 16,
|
|
GPIO_A_IRQn = 17,
|
|
GPIO_B_IRQn = 18,
|
|
SPI0_IRQn = 19,
|
|
BLEB_IRQn = 20,
|
|
BLEL_IRQn = 21,
|
|
USB_IRQn = 22,
|
|
USB2_IRQn = 23,
|
|
TMR1_IRQn = 24,
|
|
TMR2_IRQn = 25,
|
|
UART0_IRQn = 26,
|
|
UART1_IRQn = 27,
|
|
RTC_IRQn = 28,
|
|
ADC_IRQn = 29,
|
|
I2C_IRQn = 30,
|
|
PWMX_SPI1_IRQn = 31,
|
|
TMR3_IRQn = 32,
|
|
UART2_IRQn = 33,
|
|
UART3_IRQn = 34,
|
|
WDOG_BAT_IRQn = 35
|
|
} IRQn_Type;
|
|
#endif
|
|
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif // __CH583SFR_H__
|
|
|
|
|
|
#ifndef __CH583USBSFR_H__
|
|
#define __CH583USBSFR_H__
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/******************************************************************************/
|
|
/* Peripheral memory map */
|
|
/******************************************************************************/
|
|
/* usb addresses
|
|
// USB: +8000H - 83FFH */
|
|
#define USB_BASE_ADDR (0x40008000)
|
|
#define USB2_BASE_ADDR (0x40008400)
|
|
#define BA_USB ((PUINT8V)0x40008000) // point USB base address
|
|
#define BA_USB2 ((PUINT8V)0x40008400) // point USB2 base address
|
|
|
|
/* USB */
|
|
#define R32_USB_CONTROL (*((PUINT32V)0x40008000)) // USB control & interrupt enable & device address
|
|
#define R8_USB_CTRL (*((PUINT8V)0x40008000)) // USB base control
|
|
#define RB_UC_HOST_MODE 0x80 // enable USB host mode: 0=device mode, 1=host mode
|
|
#define RB_UC_LOW_SPEED 0x40 // enable USB low speed: 0=12Mbps, 1=1.5Mbps
|
|
#define RB_UC_DEV_PU_EN 0x20 // USB device enable and internal pullup resistance enable
|
|
#define RB_UC_SYS_CTRL1 0x20 // USB system control high bit
|
|
#define RB_UC_SYS_CTRL0 0x10 // USB system control low bit
|
|
#define MASK_UC_SYS_CTRL 0x30 // bit mask of USB system control
|
|
// bUC_HOST_MODE & bUC_SYS_CTRL1 & bUC_SYS_CTRL0: USB system control
|
|
// 0 00: disable USB device and disable internal pullup resistance
|
|
// 0 01: enable USB device and disable internal pullup resistance, need RB_PIN_USB_DP_PU=1 or need external pullup resistance
|
|
// 0 1x: enable USB device and enable internal pullup resistance
|
|
// 1 00: enable USB host and normal status
|
|
// 1 01: enable USB host and force UDP/UDM output SE0 state
|
|
// 1 10: enable USB host and force UDP/UDM output J state
|
|
// 1 11: enable USB host and force UDP/UDM output resume or K state
|
|
#define RB_UC_INT_BUSY 0x08 // enable automatic responding busy for device mode or automatic pause for host mode during interrupt flag UIF_TRANSFER valid
|
|
#define RB_UC_RESET_SIE 0x04 // force reset USB SIE, need software clear
|
|
#define RB_UC_CLR_ALL 0x02 // force clear FIFO and count of USB
|
|
#define RB_UC_DMA_EN 0x01 // DMA enable and DMA interrupt enable for USB
|
|
|
|
#define R8_UDEV_CTRL (*((PUINT8V)0x40008001)) // USB device physical prot control
|
|
#define RB_UD_PD_DIS 0x80 // disable USB UDP/UDM pulldown resistance: 0=enable pulldown, 1=disable
|
|
#define RB_UD_DP_PIN 0x20 // ReadOnly: indicate current UDP pin level
|
|
#define RB_UD_DM_PIN 0x10 // ReadOnly: indicate current UDM pin level
|
|
#define RB_UD_LOW_SPEED 0x04 // enable USB physical port low speed: 0=full speed, 1=low speed
|
|
#define RB_UD_GP_BIT 0x02 // general purpose bit
|
|
#define RB_UD_PORT_EN 0x01 // enable USB physical port I/O: 0=disable, 1=enable
|
|
|
|
#define R8_UHOST_CTRL R8_UDEV_CTRL // USB host physical prot control
|
|
#define RB_UH_PD_DIS 0x80 // disable USB UDP/UDM pulldown resistance: 0=enable pulldown, 1=disable
|
|
#define RB_UH_DP_PIN 0x20 // ReadOnly: indicate current UDP pin level
|
|
#define RB_UH_DM_PIN 0x10 // ReadOnly: indicate current UDM pin level
|
|
#define RB_UH_LOW_SPEED 0x04 // enable USB port low speed: 0=full speed, 1=low speed
|
|
#define RB_UH_BUS_RESET 0x02 // control USB bus reset: 0=normal, 1=force bus reset
|
|
#define RB_UH_PORT_EN 0x01 // enable USB port: 0=disable, 1=enable port, automatic disabled if USB device detached
|
|
|
|
#define R8_USB_INT_EN (*((PUINT8V)0x40008002)) // USB interrupt enable
|
|
#define RB_UIE_DEV_SOF 0x80 // enable interrupt for SOF received for USB device mode
|
|
#define RB_UIE_DEV_NAK 0x40 // enable interrupt for NAK responded for USB device mode
|
|
#define RB_UIE_FIFO_OV 0x10 // enable interrupt for FIFO overflow
|
|
#define RB_UIE_HST_SOF 0x08 // enable interrupt for host SOF timer action for USB host mode
|
|
#define RB_UIE_SUSPEND 0x04 // enable interrupt for USB suspend or resume event
|
|
#define RB_UIE_TRANSFER 0x02 // enable interrupt for USB transfer completion
|
|
#define RB_UIE_DETECT 0x01 // enable interrupt for USB device detected event for USB host mode
|
|
#define RB_UIE_BUS_RST 0x01 // enable interrupt for USB bus reset event for USB device mode
|
|
|
|
#define R8_USB_DEV_AD (*((PUINT8V)0x40008003)) // USB device address
|
|
#define RB_UDA_GP_BIT 0x80 // general purpose bit
|
|
#define MASK_USB_ADDR 0x7F // bit mask for USB device address
|
|
|
|
#define R32_USB_STATUS (*((PUINT32V)0x40008004)) // USB miscellaneous status & interrupt flag & interrupt status
|
|
#define R8_USB_MIS_ST (*((PUINT8V)0x40008005)) // USB miscellaneous status
|
|
#define RB_UMS_SOF_PRES 0x80 // RO, indicate host SOF timer presage status
|
|
#define RB_UMS_SOF_ACT 0x40 // RO, indicate host SOF timer action status for USB host
|
|
#define RB_UMS_SIE_FREE 0x20 // RO, indicate USB SIE free status
|
|
#define RB_UMS_R_FIFO_RDY 0x10 // RO, indicate USB receiving FIFO ready status (not empty)
|
|
#define RB_UMS_BUS_RESET 0x08 // RO, indicate USB bus reset status
|
|
#define RB_UMS_SUSPEND 0x04 // RO, indicate USB suspend status
|
|
#define RB_UMS_DM_LEVEL 0x02 // RO, indicate UDM level saved at device attached to USB host
|
|
#define RB_UMS_DEV_ATTACH 0x01 // RO, indicate device attached status on USB host
|
|
|
|
#define R8_USB_INT_FG (*((PUINT8V)0x40008006)) // USB interrupt flag
|
|
#define RB_U_IS_NAK 0x80 // RO, indicate current USB transfer is NAK received
|
|
#define RB_U_TOG_OK 0x40 // RO, indicate current USB transfer toggle is OK
|
|
#define RB_U_SIE_FREE 0x20 // RO, indicate USB SIE free status
|
|
#define RB_UIF_FIFO_OV 0x10 // FIFO overflow interrupt flag for USB, direct bit address clear or write 1 to clear
|
|
#define RB_UIF_HST_SOF 0x08 // host SOF timer interrupt flag for USB host, direct bit address clear or write 1 to clear
|
|
#define RB_UIF_SUSPEND 0x04 // USB suspend or resume event interrupt flag, direct bit address clear or write 1 to clear
|
|
#define RB_UIF_TRANSFER 0x02 // USB transfer completion interrupt flag, direct bit address clear or write 1 to clear
|
|
#define RB_UIF_DETECT 0x01 // device detected event interrupt flag for USB host mode, direct bit address clear or write 1 to clear
|
|
#define RB_UIF_BUS_RST 0x01 // bus reset event interrupt flag for USB device mode, direct bit address clear or write 1 to clear
|
|
|
|
#define R8_USB_INT_ST (*((PUINT8V)0x40008007)) // USB interrupt status
|
|
#define RB_UIS_SETUP_ACT 0x80 // RO, indicate SETUP token & 8 bytes setup request received for USB device mode
|
|
#define RB_UIS_TOG_OK 0x40 // RO, indicate current USB transfer toggle is OK
|
|
#define RB_UIS_TOKEN1 0x20 // RO, current token PID code bit 1 received for USB device mode
|
|
#define RB_UIS_TOKEN0 0x10 // RO, current token PID code bit 0 received for USB device mode
|
|
#define MASK_UIS_TOKEN 0x30 // RO, bit mask of current token PID code received for USB device mode
|
|
#define UIS_TOKEN_OUT 0x00
|
|
#define UIS_TOKEN_SOF 0x10
|
|
#define UIS_TOKEN_IN 0x20
|
|
#define UIS_TOKEN_SETUP 0x30
|
|
// bUIS_TOKEN1 & bUIS_TOKEN0: current token PID code received for USB device mode, keep last status during SETUP token, clear RB_UIF_TRANSFER ( RB_UIF_TRANSFER from 1 to 0 ) to set free
|
|
// 00: OUT token PID received
|
|
// 01: SOF token PID received
|
|
// 10: IN token PID received
|
|
// 11: free
|
|
#define MASK_UIS_ENDP 0x0F // RO, bit mask of current transfer endpoint number for USB device mode
|
|
#define MASK_UIS_H_RES 0x0F // RO, bit mask of current transfer handshake response for USB host mode: 0000=no response, time out from device, others=handshake response PID received
|
|
|
|
#define R8_USB_RX_LEN (*((PUINT8V)0x40008008)) // USB receiving length
|
|
#define R32_USB_BUF_MODE (*((PUINT32V)0x4000800C)) // USB endpoint buffer mode
|
|
#define R8_UEP4_1_MOD (*((PUINT8V)0x4000800C)) // endpoint 4/1 mode
|
|
#define RB_UEP1_RX_EN 0x80 // enable USB endpoint 1 receiving (OUT)
|
|
#define RB_UEP1_TX_EN 0x40 // enable USB endpoint 1 transmittal (IN)
|
|
#define RB_UEP1_BUF_MOD 0x10 // buffer mode of USB endpoint 1
|
|
// bUEPn_RX_EN & bUEPn_TX_EN & bUEPn_BUF_MOD: USB endpoint 1/2/3 buffer mode, buffer start address is UEPn_DMA
|
|
// 0 0 x: disable endpoint and disable buffer
|
|
// 1 0 0: 64 bytes buffer for receiving (OUT endpoint)
|
|
// 1 0 1: dual 64 bytes buffer by toggle bit bUEP_R_TOG selection for receiving (OUT endpoint), total=128bytes
|
|
// 0 1 0: 64 bytes buffer for transmittal (IN endpoint)
|
|
// 0 1 1: dual 64 bytes buffer by toggle bit bUEP_T_TOG selection for transmittal (IN endpoint), total=128bytes
|
|
// 1 1 0: 64 bytes buffer for receiving (OUT endpoint) + 64 bytes buffer for transmittal (IN endpoint), total=128bytes
|
|
// 1 1 1: dual 64 bytes buffer by bUEP_R_TOG selection for receiving (OUT endpoint) + dual 64 bytes buffer by bUEP_T_TOG selection for transmittal (IN endpoint), total=256bytes
|
|
#define RB_UEP4_RX_EN 0x08 // enable USB endpoint 4 receiving (OUT)
|
|
#define RB_UEP4_TX_EN 0x04 // enable USB endpoint 4 transmittal (IN)
|
|
// bUEP4_RX_EN & bUEP4_TX_EN: USB endpoint 4 buffer mode, buffer start address is UEP0_DMA
|
|
// 0 0: single 64 bytes buffer for endpoint 0 receiving & transmittal (OUT & IN endpoint)
|
|
// 1 0: single 64 bytes buffer for endpoint 0 receiving & transmittal (OUT & IN endpoint) + 64 bytes buffer for endpoint 4 receiving (OUT endpoint), total=128bytes
|
|
// 0 1: single 64 bytes buffer for endpoint 0 receiving & transmittal (OUT & IN endpoint) + 64 bytes buffer for endpoint 4 transmittal (IN endpoint), total=128bytes
|
|
// 1 1: single 64 bytes buffer for endpoint 0 receiving & transmittal (OUT & IN endpoint)
|
|
// + 64 bytes buffer for endpoint 4 receiving (OUT endpoint) + 64 bytes buffer for endpoint 4 transmittal (IN endpoint), total=192bytes
|
|
|
|
#define R8_UEP2_3_MOD (*((PUINT8V)0x4000800D)) // endpoint 2/3 mode
|
|
#define RB_UEP3_RX_EN 0x80 // enable USB endpoint 3 receiving (OUT)
|
|
#define RB_UEP3_TX_EN 0x40 // enable USB endpoint 3 transmittal (IN)
|
|
#define RB_UEP3_BUF_MOD 0x10 // buffer mode of USB endpoint 3
|
|
#define RB_UEP2_RX_EN 0x08 // enable USB endpoint 2 receiving (OUT)
|
|
#define RB_UEP2_TX_EN 0x04 // enable USB endpoint 2 transmittal (IN)
|
|
#define RB_UEP2_BUF_MOD 0x01 // buffer mode of USB endpoint 2
|
|
|
|
#define R8_UEP567_MOD (*((PUINT8V)0x4000800E)) // endpoint 5/6/7 mode
|
|
#define RB_UEP7_RX_EN 0x20 // enable USB endpoint 7 receiving (OUT)
|
|
#define RB_UEP7_TX_EN 0x10 // enable USB endpoint 7 transmittal (IN)
|
|
#define RB_UEP6_RX_EN 0x08 // enable USB endpoint 6 receiving (OUT)
|
|
#define RB_UEP6_TX_EN 0x04 // enable USB endpoint 6 transmittal (IN)
|
|
#define RB_UEP5_RX_EN 0x02 // enable USB endpoint 5 receiving (OUT)
|
|
#define RB_UEP5_TX_EN 0x01 // enable USB endpoint 5 transmittal (IN)
|
|
// bUEPn_RX_EN & bUEPn_TX_EN: USB endpoint 5/6/7 buffer mode, buffer start address is UEPn_DMA
|
|
// 0 0: disable endpoint and disable buffer
|
|
// 1 0: 64 bytes buffer for receiving (OUT endpoint)
|
|
// 0 1: 64 bytes buffer for transmittal (IN endpoint)
|
|
// 1 1: 64 bytes buffer for receiving (OUT endpoint) + 64 bytes buffer for transmittal (IN endpoint), total=128bytes
|
|
|
|
#define R8_UH_EP_MOD R8_UEP2_3_MOD //host endpoint mode
|
|
#define RB_UH_EP_TX_EN 0x40 // enable USB host OUT endpoint transmittal
|
|
#define RB_UH_EP_TBUF_MOD 0x10 // buffer mode of USB host OUT endpoint
|
|
// bUH_EP_TX_EN & bUH_EP_TBUF_MOD: USB host OUT endpoint buffer mode, buffer start address is UH_TX_DMA
|
|
// 0 x: disable endpoint and disable buffer
|
|
// 1 0: 64 bytes buffer for transmittal (OUT endpoint)
|
|
// 1 1: dual 64 bytes buffer by toggle bit bUH_T_TOG selection for transmittal (OUT endpoint), total=128bytes
|
|
#define RB_UH_EP_RX_EN 0x08 // enable USB host IN endpoint receiving
|
|
#define RB_UH_EP_RBUF_MOD 0x01 // buffer mode of USB host IN endpoint
|
|
// bUH_EP_RX_EN & bUH_EP_RBUF_MOD: USB host IN endpoint buffer mode, buffer start address is UH_RX_DMA
|
|
// 0 x: disable endpoint and disable buffer
|
|
// 1 0: 64 bytes buffer for receiving (IN endpoint)
|
|
// 1 1: dual 64 bytes buffer by toggle bit bUH_R_TOG selection for receiving (IN endpoint), total=128bytes
|
|
|
|
#define R16_UEP0_DMA (*((PUINT16V)0x40008010)) // endpoint 0 DMA buffer address
|
|
#define R16_UEP1_DMA (*((PUINT16V)0x40008014)) // endpoint 1 DMA buffer address
|
|
#define R16_UEP2_DMA (*((PUINT16V)0x40008018)) // endpoint 2 DMA buffer address
|
|
#define R16_UH_RX_DMA R16_UEP2_DMA // host rx endpoint buffer address
|
|
#define R16_UEP3_DMA (*((PUINT16V)0x4000801C)) // endpoint 3 DMA buffer address
|
|
#define R16_UH_TX_DMA R16_UEP3_DMA // host tx endpoint buffer address
|
|
#define R16_UEP5_DMA (*((PUINT16V)0x40008054)) // endpoint 5 DMA buffer address
|
|
#define R16_UEP6_DMA (*((PUINT16V)0x40008058)) // endpoint 6 DMA buffer address
|
|
#define R16_UEP7_DMA (*((PUINT16V)0x4000805C)) // endpoint 7 DMA buffer address
|
|
#define R32_USB_EP0_CTRL (*((PUINT32V)0x40008020)) // endpoint 0 control & transmittal length
|
|
#define R8_UEP0_T_LEN (*((PUINT8V)0x40008020)) // endpoint 0 transmittal length
|
|
#define R8_UEP0_CTRL (*((PUINT8V)0x40008022)) // endpoint 0 control
|
|
#define R32_USB_EP1_CTRL (*((PUINT32V)0x40008024)) // endpoint 1 control & transmittal length
|
|
#define R8_UEP1_T_LEN (*((PUINT8V)0x40008024)) // endpoint 1 transmittal length
|
|
#define R8_UEP1_CTRL (*((PUINT8V)0x40008026)) // endpoint 1 control
|
|
#define RB_UEP_R_TOG 0x80 // expected data toggle flag of USB endpoint X receiving (OUT): 0=DATA0, 1=DATA1
|
|
#define RB_UEP_T_TOG 0x40 // prepared data toggle flag of USB endpoint X transmittal (IN): 0=DATA0, 1=DATA1
|
|
#define RB_UEP_AUTO_TOG 0x10 // enable automatic toggle after successful transfer completion on endpoint 1/2/3: 0=manual toggle, 1=automatic toggle
|
|
#define RB_UEP_R_RES1 0x08 // handshake response type high bit for USB endpoint X receiving (OUT)
|
|
#define RB_UEP_R_RES0 0x04 // handshake response type low bit for USB endpoint X receiving (OUT)
|
|
#define MASK_UEP_R_RES 0x0C // bit mask of handshake response type for USB endpoint X receiving (OUT)
|
|
#define UEP_R_RES_ACK 0x00
|
|
#define UEP_R_RES_TOUT 0x04
|
|
#define UEP_R_RES_NAK 0x08
|
|
#define UEP_R_RES_STALL 0x0C
|
|
// RB_UEP_R_RES1 & RB_UEP_R_RES0: handshake response type for USB endpoint X receiving (OUT)
|
|
// 00: ACK (ready)
|
|
// 01: no response, time out to host, for non-zero endpoint isochronous transactions
|
|
// 10: NAK (busy)
|
|
// 11: STALL (error)
|
|
#define RB_UEP_T_RES1 0x02 // handshake response type high bit for USB endpoint X transmittal (IN)
|
|
#define RB_UEP_T_RES0 0x01 // handshake response type low bit for USB endpoint X transmittal (IN)
|
|
#define MASK_UEP_T_RES 0x03 // bit mask of handshake response type for USB endpoint X transmittal (IN)
|
|
#define UEP_T_RES_ACK 0x00
|
|
#define UEP_T_RES_TOUT 0x01
|
|
#define UEP_T_RES_NAK 0x02
|
|
#define UEP_T_RES_STALL 0x03
|
|
// bUEP_T_RES1 & bUEP_T_RES0: handshake response type for USB endpoint X transmittal (IN)
|
|
// 00: DATA0 or DATA1 then expecting ACK (ready)
|
|
// 01: DATA0 or DATA1 then expecting no response, time out from host, for non-zero endpoint isochronous transactions
|
|
// 10: NAK (busy)
|
|
// 11: STALL (error)
|
|
|
|
#define R8_UH_SETUP R8_UEP1_CTRL // host aux setup
|
|
#define RB_UH_PRE_PID_EN 0x80 // USB host PRE PID enable for low speed device via hub
|
|
#define RB_UH_SOF_EN 0x40 // USB host automatic SOF enable
|
|
|
|
#define R32_USB_EP2_CTRL (*((PUINT32V)0x40008028)) // endpoint 2 control & transmittal length
|
|
#define R8_UEP2_T_LEN (*((PUINT8V)0x40008028)) // endpoint 2 transmittal length
|
|
#define R8_UEP2_CTRL (*((PUINT8V)0x4000802A)) // endpoint 2 control
|
|
|
|
#define R8_UH_EP_PID R8_UEP2_T_LEN // host endpoint and PID
|
|
#define MASK_UH_TOKEN 0xF0 // bit mask of token PID for USB host transfer
|
|
#define MASK_UH_ENDP 0x0F // bit mask of endpoint number for USB host transfer
|
|
|
|
#define R8_UH_RX_CTRL R8_UEP2_CTRL // host receiver endpoint control
|
|
#define RB_UH_R_TOG 0x80 // expected data toggle flag of host receiving (IN): 0=DATA0, 1=DATA1
|
|
#define RB_UH_R_AUTO_TOG 0x10 // enable automatic toggle after successful transfer completion: 0=manual toggle, 1=automatic toggle
|
|
#define RB_UH_R_RES 0x04 // prepared handshake response type for host receiving (IN): 0=ACK (ready), 1=no response, time out to device, for isochronous transactions
|
|
|
|
#define R32_USB_EP3_CTRL (*((PUINT32V)0x4000802c)) // endpoint 3 control & transmittal length
|
|
#define R8_UEP3_T_LEN (*((PUINT8V)0x4000802c)) // endpoint 3 transmittal length
|
|
#define R8_UEP3_CTRL (*((PUINT8V)0x4000802e)) // endpoint 3 control
|
|
#define R8_UH_TX_LEN R8_UEP3_T_LEN // host transmittal endpoint transmittal length
|
|
|
|
#define R8_UH_TX_CTRL R8_UEP3_CTRL // host transmittal endpoint control
|
|
#define RB_UH_T_TOG 0x40 // prepared data toggle flag of host transmittal (SETUP/OUT): 0=DATA0, 1=DATA1
|
|
#define RB_UH_T_AUTO_TOG 0x10 // enable automatic toggle after successful transfer completion: 0=manual toggle, 1=automatic toggle
|
|
#define RB_UH_T_RES 0x01 // expected handshake response type for host transmittal (SETUP/OUT): 0=ACK (ready), 1=no response, time out from device, for isochronous transactions
|
|
|
|
#define R32_USB_EP4_CTRL (*((PUINT32V)0x40008030)) // endpoint 4 control & transmittal length
|
|
#define R8_UEP4_T_LEN (*((PUINT8V)0x40008030)) // endpoint 4 transmittal length
|
|
#define R8_UEP4_CTRL (*((PUINT8V)0x40008032)) // endpoint 4 control
|
|
|
|
#define R32_USB_EP5_CTRL (*((PUINT32V)0x40008064)) // endpoint 5 control & transmittal length
|
|
#define R8_UEP5_T_LEN (*((PUINT8V)0x40008064)) // endpoint 5 transmittal length
|
|
#define R8_UEP5_CTRL (*((PUINT8V)0x40008066)) // endpoint 5 control
|
|
|
|
#define R32_USB_EP6_CTRL (*((PUINT32V)0x40008068)) // endpoint 6 control & transmittal length
|
|
#define R8_UEP6_T_LEN (*((PUINT8V)0x40008068)) // endpoint 6 transmittal length
|
|
#define R8_UEP6_CTRL (*((PUINT8V)0x4000806A)) // endpoint 6 control
|
|
|
|
#define R32_USB_EP7_CTRL (*((PUINT32V)0x4000806C)) // endpoint 7 control & transmittal length
|
|
#define R8_UEP7_T_LEN (*((PUINT8V)0x4000806C)) // endpoint 7 transmittal length
|
|
#define R8_UEP7_CTRL (*((PUINT8V)0x4000806E)) // endpoint 7 control
|
|
|
|
/* USB2 */
|
|
#define R32_USB2_CONTROL (*((PUINT32V)0x40008400)) // USB2 control & interrupt enable & device address
|
|
#define R8_USB2_CTRL (*((PUINT8V)0x40008400)) // USB2 base control
|
|
#define R8_U2DEV_CTRL (*((PUINT8V)0x40008401)) // USB2 device physical prot control
|
|
#define R8_U2HOST_CTRL R8_U2DEV_CTRL // USB2 host physical prot control
|
|
#define R8_USB2_INT_EN (*((PUINT8V)0x40008402)) // USB2 interrupt enable
|
|
#define R8_USB2_DEV_AD (*((PUINT8V)0x40008403)) // USB2 device address
|
|
#define R32_USB2_STATUS (*((PUINT32V)0x40008404)) // USB2 miscellaneous status & interrupt flag & interrupt status
|
|
#define R8_USB2_MIS_ST (*((PUINT8V)0x40008405)) // USB2 miscellaneous status
|
|
#define R8_USB2_INT_FG (*((PUINT8V)0x40008406)) // USB2 interrupt flag
|
|
#define R8_USB2_INT_ST (*((PUINT8V)0x40008407)) // USB2 interrupt status
|
|
#define R8_USB2_RX_LEN (*((PUINT8V)0x40008408)) // USB2 receiving length
|
|
#define R32_USB2_BUF_MODE (*((PUINT32V)0x4000840C)) // USB2 endpoint buffer mode
|
|
#define R8_U2EP4_1_MOD (*((PUINT8V)0x4000840C)) // USB2 endpoint 4/1 mode
|
|
#define R8_U2EP2_3_MOD (*((PUINT8V)0x4000840D)) // USB2 endpoint 2/3 mode
|
|
#define R8_U2EP567_MOD (*((PUINT8V)0x4000840E)) // USB2 endpoint 5/6/7 mode
|
|
#define R8_U2H_EP_MOD R8_U2EP2_3_MOD // USB2 host endpoint mode
|
|
#define R16_U2EP0_DMA (*((PUINT16V)0x40008410)) // USB2 endpoint 0 DMA buffer address
|
|
#define R16_U2EP1_DMA (*((PUINT16V)0x40008414)) // USB2 endpoint 1 DMA buffer address
|
|
#define R16_U2EP2_DMA (*((PUINT16V)0x40008418)) // USB2 endpoint 2 DMA buffer address
|
|
#define R16_U2H_RX_DMA R16_U2EP2_DMA // USB2 host rx endpoint buffer address
|
|
#define R16_U2EP3_DMA (*((PUINT16V)0x4000841C)) // USB2 endpoint 3 DMA buffer address
|
|
#define R16_U2H_TX_DMA R16_U2EP3_DMA // USB2 host tx endpoint buffer address
|
|
#define R16_U2EP5_DMA (*((PUINT16V)0x40008454)) // USB2 endpoint 5 DMA buffer address
|
|
#define R16_U2EP6_DMA (*((PUINT16V)0x40008458)) // USB2 endpoint 6 DMA buffer address
|
|
#define R16_U2EP7_DMA (*((PUINT16V)0x4000845C)) // USB2 endpoint 7 DMA buffer address
|
|
#define R32_USB2_EP0_CTRL (*((PUINT32V)0x40008420)) // USB2 endpoint 0 control & transmittal length
|
|
#define R8_U2EP0_T_LEN (*((PUINT8V)0x40008420)) // USB2 endpoint 0 transmittal length
|
|
#define R8_U2EP0_CTRL (*((PUINT8V)0x40008422)) // USB2 endpoint 0 control
|
|
#define R32_USB2_EP1_CTRL (*((PUINT32V)0x40008424)) // USB2 endpoint 1 control & transmittal length
|
|
#define R8_U2EP1_T_LEN (*((PUINT8V)0x40008424)) // USB2 endpoint 1 transmittal length
|
|
#define R8_U2EP1_CTRL (*((PUINT8V)0x40008426)) // USB2 endpoint 1 control
|
|
#define R8_U2H_SETUP R8_U2EP1_CTRL // USB2 host aux setup
|
|
#define R32_USB2_EP2_CTRL (*((PUINT32V)0x40008428)) // USB2 endpoint 2 control & transmittal length
|
|
#define R8_U2EP2_T_LEN (*((PUINT8V)0x40008428)) // USB2 endpoint 2 transmittal length
|
|
#define R8_U2EP2_CTRL (*((PUINT8V)0x4000842A)) // USB2 endpoint 2 control
|
|
#define R8_U2H_EP_PID R8_U2EP2_T_LEN // USB2 host endpoint and PID
|
|
#define R8_U2H_RX_CTRL R8_U2EP2_CTRL // USB2 host receiver endpoint control
|
|
#define R32_USB2_EP3_CTRL (*((PUINT32V)0x4000842c)) // USB2 endpoint 3 control & transmittal length
|
|
#define R8_U2EP3_T_LEN (*((PUINT8V)0x4000842c)) // USB2 endpoint 3 transmittal length
|
|
#define R8_U2EP3_CTRL (*((PUINT8V)0x4000842e)) // USB2 endpoint 3 control
|
|
#define R8_U2H_TX_LEN R8_U2EP3_T_LEN // USB2 host transmittal endpoint transmittal length
|
|
#define R8_U2H_TX_CTRL R8_U2EP3_CTRL // USB2 host transmittal endpoint control
|
|
#define R32_USB2_EP4_CTRL (*((PUINT32V)0x40008430)) // USB2 endpoint 4 control & transmittal length
|
|
#define R8_U2EP4_T_LEN (*((PUINT8V)0x40008430)) // USB2 endpoint 4 transmittal length
|
|
#define R8_U2EP4_CTRL (*((PUINT8V)0x40008432)) // USB2 endpoint 4 control
|
|
#define R32_USB2_EP5_CTRL (*((PUINT32V)0x40008464)) // USB2 endpoint 5 control & transmittal length
|
|
#define R8_U2EP5_T_LEN (*((PUINT8V)0x40008464)) // USB2 endpoint 5 transmittal length
|
|
#define R8_U2EP5_CTRL (*((PUINT8V)0x40008466)) // USB2 endpoint 5 control
|
|
#define R32_USB2_EP6_CTRL (*((PUINT32V)0x40008468)) // USB2 endpoint 6 control & transmittal length
|
|
#define R8_U2EP6_T_LEN (*((PUINT8V)0x40008468)) // USB2 endpoint 6 transmittal length
|
|
#define R8_U2EP6_CTRL (*((PUINT8V)0x4000846A)) // USB2 endpoint 6 control
|
|
#define R32_USB2_EP7_CTRL (*((PUINT32V)0x4000846C)) // USB2 endpoint 7 control & transmittal length
|
|
#define R8_U2EP7_T_LEN (*((PUINT8V)0x4000846C)) // USB2 endpoint 7 transmittal length
|
|
#define R8_U2EP7_CTRL (*((PUINT8V)0x4000846E)) // USB2 endpoint 7 control
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif //__CH583USBSFR_H__
|
|
|
|
|
|
#ifndef __USB_TYPE__
|
|
#define __USB_TYPE__
|
|
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/*----- USB constant and structure define --------------------------------*/
|
|
|
|
/* USB PID */
|
|
#ifndef USB_PID_SETUP
|
|
#define USB_PID_NULL 0x00 /* reserved PID */
|
|
#define USB_PID_SOF 0x05
|
|
#define USB_PID_SETUP 0x0D
|
|
#define USB_PID_IN 0x09
|
|
#define USB_PID_OUT 0x01
|
|
#define USB_PID_ACK 0x02
|
|
#define USB_PID_NAK 0x0A
|
|
#define USB_PID_STALL 0x0E
|
|
#define USB_PID_DATA0 0x03
|
|
#define USB_PID_DATA1 0x0B
|
|
#define USB_PID_PRE 0x0C
|
|
#endif
|
|
|
|
/* USB standard device request code */
|
|
#ifndef USB_GET_DESCRIPTOR
|
|
#define USB_GET_STATUS 0x00
|
|
#define USB_CLEAR_FEATURE 0x01
|
|
#define USB_SET_FEATURE 0x03
|
|
#define USB_SET_ADDRESS 0x05
|
|
#define USB_GET_DESCRIPTOR 0x06
|
|
#define USB_SET_DESCRIPTOR 0x07
|
|
#define USB_GET_CONFIGURATION 0x08
|
|
#define USB_SET_CONFIGURATION 0x09
|
|
#define USB_GET_INTERFACE 0x0A
|
|
#define USB_SET_INTERFACE 0x0B
|
|
#define USB_SYNCH_FRAME 0x0C
|
|
#endif
|
|
|
|
/* USB hub class request code */
|
|
#ifndef HUB_GET_DESCRIPTOR
|
|
#define HUB_GET_STATUS 0x00
|
|
#define HUB_CLEAR_FEATURE 0x01
|
|
#define HUB_GET_STATE 0x02
|
|
#define HUB_SET_FEATURE 0x03
|
|
#define HUB_GET_DESCRIPTOR 0x06
|
|
#define HUB_SET_DESCRIPTOR 0x07
|
|
#endif
|
|
|
|
/* USB HID class request code */
|
|
#ifndef HID_GET_REPORT
|
|
#define HID_GET_REPORT 0x01
|
|
#define HID_GET_IDLE 0x02
|
|
#define HID_GET_PROTOCOL 0x03
|
|
#define HID_SET_REPORT 0x09
|
|
#define HID_SET_IDLE 0x0A
|
|
#define HID_SET_PROTOCOL 0x0B
|
|
#endif
|
|
|
|
/* Bit define for USB request type */
|
|
#ifndef USB_REQ_TYP_MASK
|
|
#define USB_REQ_TYP_IN 0x80 /* control IN, device to host */
|
|
#define USB_REQ_TYP_OUT 0x00 /* control OUT, host to device */
|
|
#define USB_REQ_TYP_READ 0x80 /* control read, device to host */
|
|
#define USB_REQ_TYP_WRITE 0x00 /* control write, host to device */
|
|
#define USB_REQ_TYP_MASK 0x60 /* bit mask of request type */
|
|
#define USB_REQ_TYP_STANDARD 0x00
|
|
#define USB_REQ_TYP_CLASS 0x20
|
|
#define USB_REQ_TYP_VENDOR 0x40
|
|
#define USB_REQ_TYP_RESERVED 0x60
|
|
#define USB_REQ_RECIP_MASK 0x1F /* bit mask of request recipient */
|
|
#define USB_REQ_RECIP_DEVICE 0x00
|
|
#define USB_REQ_RECIP_INTERF 0x01
|
|
#define USB_REQ_RECIP_ENDP 0x02
|
|
#define USB_REQ_RECIP_OTHER 0x03
|
|
#endif
|
|
|
|
/* USB request type for hub class request */
|
|
#ifndef HUB_GET_HUB_DESCRIPTOR
|
|
#define HUB_CLEAR_HUB_FEATURE 0x20
|
|
#define HUB_CLEAR_PORT_FEATURE 0x23
|
|
#define HUB_GET_BUS_STATE 0xA3
|
|
#define HUB_GET_HUB_DESCRIPTOR 0xA0
|
|
#define HUB_GET_HUB_STATUS 0xA0
|
|
#define HUB_GET_PORT_STATUS 0xA3
|
|
#define HUB_SET_HUB_DESCRIPTOR 0x20
|
|
#define HUB_SET_HUB_FEATURE 0x20
|
|
#define HUB_SET_PORT_FEATURE 0x23
|
|
#endif
|
|
|
|
/* Hub class feature selectors */
|
|
#ifndef HUB_PORT_RESET
|
|
#define HUB_C_HUB_LOCAL_POWER 0
|
|
#define HUB_C_HUB_OVER_CURRENT 1
|
|
#define HUB_PORT_CONNECTION 0
|
|
#define HUB_PORT_ENABLE 1
|
|
#define HUB_PORT_SUSPEND 2
|
|
#define HUB_PORT_OVER_CURRENT 3
|
|
#define HUB_PORT_RESET 4
|
|
#define HUB_PORT_POWER 8
|
|
#define HUB_PORT_LOW_SPEED 9
|
|
#define HUB_C_PORT_CONNECTION 16
|
|
#define HUB_C_PORT_ENABLE 17
|
|
#define HUB_C_PORT_SUSPEND 18
|
|
#define HUB_C_PORT_OVER_CURRENT 19
|
|
#define HUB_C_PORT_RESET 20
|
|
#endif
|
|
|
|
/* USB descriptor type */
|
|
#ifndef USB_DESCR_TYP_DEVICE
|
|
#define USB_DESCR_TYP_DEVICE 0x01
|
|
#define USB_DESCR_TYP_CONFIG 0x02
|
|
#define USB_DESCR_TYP_STRING 0x03
|
|
#define USB_DESCR_TYP_INTERF 0x04
|
|
#define USB_DESCR_TYP_ENDP 0x05
|
|
#define USB_DESCR_TYP_QUALIF 0x06
|
|
#define USB_DESCR_TYP_SPEED 0x07
|
|
#define USB_DESCR_TYP_OTG 0x09
|
|
#define USB_DESCR_TYP_HID 0x21
|
|
#define USB_DESCR_TYP_REPORT 0x22
|
|
#define USB_DESCR_TYP_PHYSIC 0x23
|
|
#define USB_DESCR_TYP_CS_INTF 0x24
|
|
#define USB_DESCR_TYP_CS_ENDP 0x25
|
|
#define USB_DESCR_TYP_HUB 0x29
|
|
#endif
|
|
|
|
/* USB device class */
|
|
#ifndef USB_DEV_CLASS_HUB
|
|
#define USB_DEV_CLASS_RESERVED 0x00
|
|
#define USB_DEV_CLASS_AUDIO 0x01
|
|
#define USB_DEV_CLASS_COMMUNIC 0x02
|
|
#define USB_DEV_CLASS_HID 0x03
|
|
#define USB_DEV_CLASS_MONITOR 0x04
|
|
#define USB_DEV_CLASS_PHYSIC_IF 0x05
|
|
#define USB_DEV_CLASS_POWER 0x06
|
|
#define USB_DEV_CLASS_PRINTER 0x07
|
|
#define USB_DEV_CLASS_STORAGE 0x08
|
|
#define USB_DEV_CLASS_HUB 0x09
|
|
#define USB_DEV_CLASS_VEN_SPEC 0xFF
|
|
#endif
|
|
|
|
/* USB endpoint type and attributes */
|
|
#ifndef USB_ENDP_TYPE_MASK
|
|
#define USB_ENDP_DIR_MASK 0x80
|
|
#define USB_ENDP_ADDR_MASK 0x0F
|
|
#define USB_ENDP_TYPE_MASK 0x03
|
|
#define USB_ENDP_TYPE_CTRL 0x00
|
|
#define USB_ENDP_TYPE_ISOCH 0x01
|
|
#define USB_ENDP_TYPE_BULK 0x02
|
|
#define USB_ENDP_TYPE_INTER 0x03
|
|
#endif
|
|
|
|
#ifndef USB_DEVICE_ADDR
|
|
#define USB_DEVICE_ADDR 0x02 /* 默认的USB设备地址 */
|
|
#endif
|
|
#ifndef DEFAULT_ENDP0_SIZE
|
|
#define DEFAULT_ENDP0_SIZE 8 /* default maximum packet size for endpoint 0 */
|
|
#endif
|
|
#ifndef MAX_PACKET_SIZE
|
|
#define MAX_PACKET_SIZE 64 /* maximum packet size */
|
|
#endif
|
|
#ifndef USB_BO_CBW_SIZE
|
|
#define USB_BO_CBW_SIZE 0x1F /* 命令块CBW的总长度 */
|
|
#define USB_BO_CSW_SIZE 0x0D /* 命令状态块CSW的总长度 */
|
|
#endif
|
|
#ifndef USB_BO_CBW_SIG
|
|
#define USB_BO_CBW_SIG 0x43425355 /* 命令块CBW识别标志'USBC' */
|
|
#define USB_BO_CSW_SIG 0x53425355 /* 命令状态块CSW识别标志'USBS' */
|
|
#endif
|
|
|
|
#ifndef __PACKED
|
|
#define __PACKED __attribute__((packed))
|
|
#endif
|
|
|
|
typedef struct __PACKED _USB_SETUP_REQ {
|
|
UINT8 bRequestType;
|
|
UINT8 bRequest;
|
|
UINT16 wValue;
|
|
UINT16 wIndex;
|
|
UINT16 wLength;
|
|
} USB_SETUP_REQ, *PUSB_SETUP_REQ;
|
|
|
|
typedef struct __PACKED _USB_DEVICE_DESCR {
|
|
UINT8 bLength;
|
|
UINT8 bDescriptorType;
|
|
UINT16 bcdUSB;
|
|
UINT8 bDeviceClass;
|
|
UINT8 bDeviceSubClass;
|
|
UINT8 bDeviceProtocol;
|
|
UINT8 bMaxPacketSize0;
|
|
UINT16 idVendor;
|
|
UINT16 idProduct;
|
|
UINT16 bcdDevice;
|
|
UINT8 iManufacturer;
|
|
UINT8 iProduct;
|
|
UINT8 iSerialNumber;
|
|
UINT8 bNumConfigurations;
|
|
} USB_DEV_DESCR, *PUSB_DEV_DESCR;
|
|
|
|
typedef struct __PACKED _USB_CONFIG_DESCR {
|
|
UINT8 bLength;
|
|
UINT8 bDescriptorType;
|
|
UINT16 wTotalLength;
|
|
UINT8 bNumInterfaces;
|
|
UINT8 bConfigurationValue;
|
|
UINT8 iConfiguration;
|
|
UINT8 bmAttributes;
|
|
UINT8 MaxPower;
|
|
} USB_CFG_DESCR, *PUSB_CFG_DESCR;
|
|
|
|
typedef struct __PACKED _USB_INTERF_DESCR {
|
|
UINT8 bLength;
|
|
UINT8 bDescriptorType;
|
|
UINT8 bInterfaceNumber;
|
|
UINT8 bAlternateSetting;
|
|
UINT8 bNumEndpoints;
|
|
UINT8 bInterfaceClass;
|
|
UINT8 bInterfaceSubClass;
|
|
UINT8 bInterfaceProtocol;
|
|
UINT8 iInterface;
|
|
} USB_ITF_DESCR, *PUSB_ITF_DESCR;
|
|
|
|
typedef struct __PACKED _USB_ENDPOINT_DESCR {
|
|
UINT8 bLength;
|
|
UINT8 bDescriptorType;
|
|
UINT8 bEndpointAddress;
|
|
UINT8 bmAttributes;
|
|
UINT16 wMaxPacketSize;
|
|
UINT8 bInterval;
|
|
} USB_ENDP_DESCR, *PUSB_ENDP_DESCR;
|
|
|
|
typedef struct __PACKED _USB_CONFIG_DESCR_LONG {
|
|
USB_CFG_DESCR cfg_descr;
|
|
USB_ITF_DESCR itf_descr;
|
|
USB_ENDP_DESCR endp_descr[1];
|
|
} USB_CFG_DESCR_LONG, *PUSB_CFG_DESCR_LONG;
|
|
|
|
typedef USB_CFG_DESCR_LONG *PXUSB_CFG_DESCR_LONG;
|
|
|
|
typedef struct __PACKED _USB_HUB_DESCR {
|
|
UINT8 bDescLength;
|
|
UINT8 bDescriptorType;
|
|
UINT8 bNbrPorts;
|
|
UINT8 wHubCharacteristicsL;
|
|
UINT8 wHubCharacteristicsH;
|
|
UINT8 bPwrOn2PwrGood;
|
|
UINT8 bHubContrCurrent;
|
|
UINT8 DeviceRemovable;
|
|
UINT8 PortPwrCtrlMask;
|
|
} USB_HUB_DESCR, *PUSB_HUB_DESCR;
|
|
|
|
typedef USB_HUB_DESCR *PXUSB_HUB_DESCR;
|
|
|
|
typedef struct __PACKED _USB_HID_DESCR {
|
|
UINT8 bLength;
|
|
UINT8 bDescriptorType;
|
|
UINT16 bcdHID;
|
|
UINT8 bCountryCode;
|
|
UINT8 bNumDescriptors;
|
|
UINT8 bDescriptorTypeX;
|
|
UINT8 wDescriptorLengthL;
|
|
UINT8 wDescriptorLengthH;
|
|
} USB_HID_DESCR, *PUSB_HID_DESCR;
|
|
|
|
typedef USB_HID_DESCR *PXUSB_HID_DESCR;
|
|
|
|
typedef struct __PACKED _UDISK_BOC_CBW { /* command of BulkOnly USB-FlashDisk */
|
|
UINT32 mCBW_Sig;
|
|
UINT32 mCBW_Tag;
|
|
UINT32 mCBW_DataLen; /* uppest byte of data length, always is 0 */
|
|
UINT8 mCBW_Flag; /* transfer direction and etc. */
|
|
UINT8 mCBW_LUN;
|
|
UINT8 mCBW_CB_Len; /* length of command block */
|
|
UINT8 mCBW_CB_Buf[16]; /* command block buffer */
|
|
} UDISK_BOC_CBW, *PUDISK_BOC_CBW;
|
|
|
|
typedef UDISK_BOC_CBW *PXUDISK_BOC_CBW;
|
|
|
|
typedef struct __PACKED _UDISK_BOC_CSW { /* status of BulkOnly USB-FlashDisk */
|
|
UINT32 mCSW_Sig;
|
|
UINT32 mCSW_Tag;
|
|
UINT32 mCSW_Residue; /* return: remainder bytes */
|
|
UINT8 mCSW_Status; /* return: result status */
|
|
} UDISK_BOC_CSW, *PUDISK_BOC_CSW;
|
|
|
|
typedef UDISK_BOC_CSW *PXUDISK_BOC_CSW;
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif // __USB_TYPE__
|
|
|