/********************************** (C) COPYRIGHT *******************************
 * File Name          : CH59x_timer1.c
 * Author             : WCH
 * Version            : V1.2
 * Date               : 2021/11/17
 * Description
 *********************************************************************************
 * Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
 * Attention: This software (modified or not) and binary are used for 
 * microcontroller manufactured by Nanjing Qinheng Microelectronics.
 *******************************************************************************/

#include "CH59x_common.h"

/*********************************************************************
 * @fn      TMR1_TimerInit
 *
 * @brief   定时功能初始化
 *
 * @param   t       - 定时时间，基于当前系统时钟Tsys, 最长定时周期 67108864
 *
 * @return  none
 */
void TMR1_TimerInit(uint32_t t)
{
    R32_TMR1_CNT_END = t;
    R8_TMR1_CTRL_MOD = RB_TMR_ALL_CLEAR;
    R8_TMR1_CTRL_MOD = RB_TMR_COUNT_EN;
}

/*********************************************************************
 * @fn      TMR1_EXTSingleCounterInit
 *
 * @brief   边沿计数功能初始化
 *
 * @param   cap     - 采集计数类型
 *
 * @return  none
 */
void TMR1_EXTSingleCounterInit(CapModeTypeDef cap)
{
    R8_TMR1_CTRL_MOD = RB_TMR_ALL_CLEAR;
    R8_TMR1_CTRL_MOD = RB_TMR_COUNT_EN | RB_TMR_CAP_COUNT | RB_TMR_MODE_IN | (cap << 6);
}

/*********************************************************************
 * @fn      TMR1_PWMInit
 *
 * @brief   PWM 输出初始化
 *
 * @param   pr      - select wave polar, refer to PWMX_PolarTypeDef
 * @param   ts      - set pwm repeat times, refer to PWM_RepeatTsTypeDef
 *
 * @return  none
 */
void TMR1_PWMInit(PWMX_PolarTypeDef pr, PWM_RepeatTsTypeDef ts)
{
    R8_TMR1_CTRL_MOD = RB_TMR_ALL_CLEAR;
    R8_TMR1_CTRL_MOD = (pr << 4) | (ts << 6);
}

/*********************************************************************
 * @fn      TMR1_CapInit
 *
 * @brief   外部信号捕捉功能初始化
 *
 * @param   cap     - select capture mode, refer to CapModeTypeDef
 *
 * @return  none
 */
void TMR1_CapInit(CapModeTypeDef cap)
{
    R8_TMR1_CTRL_MOD = RB_TMR_ALL_CLEAR;
    R8_TMR1_CTRL_MOD = RB_TMR_COUNT_EN | RB_TMR_MODE_IN | (cap << 6);
}

/*********************************************************************
 * @fn      TMR1_DMACfg
 *
 * @brief   配置DMA功能
 *
 * @param   s           - 是否打开DMA功能
 * @param   startAddr   - DMA 起始地址
 * @param   endAddr     - DMA 结束地址
 * @param   m           - 配置DMA模式
 *
 * @return  none
 */
void TMR1_DMACfg(uint8_t s, uint16_t startAddr, uint16_t endAddr, DMAModeTypeDef m)
{
    if(s == DISABLE)
    {
        R8_TMR1_CTRL_DMA = 0;
    }
    else
    {
        R16_TMR1_DMA_BEG = startAddr;
        R16_TMR1_DMA_END = endAddr;
        if(m)
            R8_TMR1_CTRL_DMA = RB_TMR_DMA_LOOP | RB_TMR_DMA_ENABLE;
        else
            R8_TMR1_CTRL_DMA = RB_TMR_DMA_ENABLE;
    }
}