You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
265 lines
7.3 KiB
265 lines
7.3 KiB
/********************************** (C) COPYRIGHT *******************************
|
|
* File Name : CH59x_gpio.c
|
|
* Author : WCH
|
|
* Version : V1.2
|
|
* Date : 2021/11/17
|
|
* Description
|
|
*********************************************************************************
|
|
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
|
|
* Attention: This software (modified or not) and binary are used for
|
|
* microcontroller manufactured by Nanjing Qinheng Microelectronics.
|
|
*******************************************************************************/
|
|
|
|
#include "CH59x_common.h"
|
|
|
|
|
|
/*********************************************************************
|
|
* @fn GPIOA_ModeCfg
|
|
*
|
|
* @brief GPIOA端口引脚模式配置
|
|
*
|
|
* @param pin - PA0-PA15
|
|
* @param mode - 输入输出类型
|
|
*
|
|
* @return none
|
|
*/
|
|
void GPIOA_ModeCfg(uint32_t pin, GPIOModeTypeDef mode)
|
|
{
|
|
switch(mode)
|
|
{
|
|
case GPIO_ModeIN_Floating:
|
|
R32_PA_PD_DRV &= ~pin;
|
|
R32_PA_PU &= ~pin;
|
|
R32_PA_DIR &= ~pin;
|
|
break;
|
|
|
|
case GPIO_ModeIN_PU:
|
|
R32_PA_PD_DRV &= ~pin;
|
|
R32_PA_PU |= pin;
|
|
R32_PA_DIR &= ~pin;
|
|
break;
|
|
|
|
case GPIO_ModeIN_PD:
|
|
R32_PA_PD_DRV |= pin;
|
|
R32_PA_PU &= ~pin;
|
|
R32_PA_DIR &= ~pin;
|
|
break;
|
|
|
|
case GPIO_ModeOut_PP_5mA:
|
|
R32_PA_PD_DRV &= ~pin;
|
|
R32_PA_DIR |= pin;
|
|
break;
|
|
|
|
case GPIO_ModeOut_PP_20mA:
|
|
R32_PA_PD_DRV |= pin;
|
|
R32_PA_DIR |= pin;
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
* @fn GPIOB_ModeCfg
|
|
*
|
|
* @brief GPIOB端口引脚模式配置
|
|
*
|
|
* @param pin - PB0-PB23
|
|
* @param mode - 输入输出类型
|
|
*
|
|
* @return none
|
|
*/
|
|
void GPIOB_ModeCfg(uint32_t pin, GPIOModeTypeDef mode)
|
|
{
|
|
switch(mode)
|
|
{
|
|
case GPIO_ModeIN_Floating:
|
|
R32_PB_PD_DRV &= ~pin;
|
|
R32_PB_PU &= ~pin;
|
|
R32_PB_DIR &= ~pin;
|
|
break;
|
|
|
|
case GPIO_ModeIN_PU:
|
|
R32_PB_PD_DRV &= ~pin;
|
|
R32_PB_PU |= pin;
|
|
R32_PB_DIR &= ~pin;
|
|
break;
|
|
|
|
case GPIO_ModeIN_PD:
|
|
R32_PB_PD_DRV |= pin;
|
|
R32_PB_PU &= ~pin;
|
|
R32_PB_DIR &= ~pin;
|
|
break;
|
|
|
|
case GPIO_ModeOut_PP_5mA:
|
|
R32_PB_PD_DRV &= ~pin;
|
|
R32_PB_DIR |= pin;
|
|
break;
|
|
|
|
case GPIO_ModeOut_PP_20mA:
|
|
R32_PB_PD_DRV |= pin;
|
|
R32_PB_DIR |= pin;
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*********************************************************************
|
|
* @fn GPIOA_ITModeCfg
|
|
*
|
|
* @brief GPIOA引脚中断模式配置
|
|
*
|
|
* @param pin - PA0-PA15
|
|
* @param mode - 触发类型
|
|
*
|
|
* @return none
|
|
*/
|
|
void GPIOA_ITModeCfg(uint32_t pin, GPIOITModeTpDef mode)
|
|
{
|
|
switch(mode)
|
|
{
|
|
case GPIO_ITMode_LowLevel: // 低电平触发
|
|
R16_PA_INT_MODE &= ~pin;
|
|
R32_PA_CLR |= pin;
|
|
break;
|
|
|
|
case GPIO_ITMode_HighLevel: // 高电平触发
|
|
R16_PA_INT_MODE &= ~pin;
|
|
R32_PA_OUT |= pin;
|
|
break;
|
|
|
|
case GPIO_ITMode_FallEdge: // 下降沿触发
|
|
R16_PA_INT_MODE |= pin;
|
|
R32_PA_CLR |= pin;
|
|
break;
|
|
|
|
case GPIO_ITMode_RiseEdge: // 上升沿触发
|
|
R16_PA_INT_MODE |= pin;
|
|
R32_PA_OUT |= pin;
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
R16_PA_INT_IF = pin;
|
|
R16_PA_INT_EN |= pin;
|
|
}
|
|
|
|
/*********************************************************************
|
|
* @fn GPIOB_ITModeCfg
|
|
*
|
|
* @brief GPIOB引脚中断模式配置
|
|
*
|
|
* @param pin - PB0-PB23
|
|
* @param mode - 触发类型
|
|
*
|
|
* @return none
|
|
*/
|
|
void GPIOB_ITModeCfg(uint32_t pin, GPIOITModeTpDef mode)
|
|
{
|
|
uint32_t Pin = pin | ((pin & (GPIO_Pin_22 | GPIO_Pin_23)) >> 14);
|
|
switch(mode)
|
|
{
|
|
case GPIO_ITMode_LowLevel: // 低电平触发
|
|
R16_PB_INT_MODE &= ~Pin;
|
|
R32_PB_CLR |= pin;
|
|
break;
|
|
|
|
case GPIO_ITMode_HighLevel: // 高电平触发
|
|
R16_PB_INT_MODE &= ~Pin;
|
|
R32_PB_OUT |= pin;
|
|
break;
|
|
|
|
case GPIO_ITMode_FallEdge: // 下降沿触发
|
|
R16_PB_INT_MODE |= Pin;
|
|
R32_PB_CLR |= pin;
|
|
break;
|
|
|
|
case GPIO_ITMode_RiseEdge: // 上升沿触发
|
|
R16_PB_INT_MODE |= Pin;
|
|
R32_PB_OUT |= pin;
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
R16_PB_INT_IF = Pin;
|
|
R16_PB_INT_EN |= Pin;
|
|
}
|
|
|
|
/*********************************************************************
|
|
* @fn GPIOPinRemap
|
|
*
|
|
* @brief 外设功能引脚映射
|
|
*
|
|
* @param s - 是否使能映射
|
|
* @param perph - RB_RF_ANT_SW_EN - RF antenna switch control output on PA4/PA5/PA12/PA13/PA14/PA15
|
|
* RB_PIN_U0_INV - RXD0/RXD0_/TXD0/TXD0_ invert input/output
|
|
* RB_PIN_INTX - INTX: INT24/INT25 PB8/PB9 -> INT24_/INT25_ PB22/PB23
|
|
* RB_PIN_MODEM - MODEM: PA6/PA7 -> PB12/PB13
|
|
* RB_PIN_I2C - I2C: PB14/PB15 -> PB14/PB15
|
|
* RB_PIN_PWMX - PWMX: PA12/PA13 -> PA6/PA7
|
|
* RB_PIN_SPI0 - SPI0: PA12/PA13/PA14/PA15 -> PB12/PB13/PB14/PB15
|
|
* RB_PIN_UART3 - UART3: PA4/PA5 -> PA4/PA5
|
|
* RB_PIN_UART2 - UART2: PB22/PB23 -> PA6/PA7
|
|
* RB_PIN_UART1 - UART1: PA8/PA9 -> PB12/PB13
|
|
* RB_PIN_UART0 - UART0: PB4/PB7 -> PA15/PA14
|
|
* RB_PIN_TMR3 - TMR2: PB22 -> PB22
|
|
* RB_PIN_TMR2 - TMR2: PA11 -> PB11
|
|
* RB_PIN_TMR1 - TMR1: PA10 -> PB10
|
|
* RB_PIN_TMR0 - TMR0: PA9 -> PB23
|
|
*
|
|
* @return none
|
|
*/
|
|
void GPIOPinRemap(FunctionalState s, uint16_t perph)
|
|
{
|
|
if(s)
|
|
{
|
|
R16_PIN_ALTERNATE |= perph;
|
|
}
|
|
else
|
|
{
|
|
R16_PIN_ALTERNATE &= ~perph;
|
|
}
|
|
}
|
|
|
|
/*********************************************************************
|
|
* @fn GPIOAGPPCfg
|
|
*
|
|
* @brief 模拟外设GPIO引脚功能控制
|
|
*
|
|
* @param s - ENABLE - 打开模拟外设功能，关闭数字功能
|
|
* DISABLE - 启用数字功能，关闭模拟外设功能
|
|
* @param perph - RB_PIN_ADC8_9_IE - ADC/TKEY 9/8通道
|
|
* RB_PIN_ADC6_7_IE - ADC/TKEY 7/6通道
|
|
* RB_PIN_ADC10_IE - ADC/TKEY 10通道
|
|
* RB_PIN_ADC11_IE - ADC/TKEY 11 通道
|
|
* RB_PIN_USB2_DP_PU - USB2 U2D+引脚内部上拉电阻
|
|
* RB_PIN_USB2_IE - USB2引脚
|
|
* RB_PIN_USB_DP_PU - USB UD+引脚内部上拉电阻
|
|
* RB_PIN_USB_IE - USB 引脚
|
|
* RB_PIN_ADC0_IE - ADC/TKEY 0 通道
|
|
* RB_PIN_ADC1_IE - ADC/TKEY 1 通道
|
|
* RB_PIN_ADC12_IE - ADC/TKEY 12 通道
|
|
* RB_PIN_ADC13_IE - ADC/TKEY 13 通道
|
|
* RB_PIN_XT32K_IE - 32KHz晶振LSE引脚
|
|
* RB_PIN_ADC2_3_IE - ADC/TKEY 2/3 通道
|
|
* RB_PIN_ADC4_5_IE - ADC/TKEY 4/5 通道
|
|
*
|
|
* @return none
|
|
*/
|
|
void GPIOAGPPCfg(FunctionalState s, uint16_t perph)
|
|
{
|
|
if(s)
|
|
{
|
|
R16_PIN_ANALOG_IE |= perph;
|
|
}
|
|
else
|
|
{
|
|
R16_PIN_ANALOG_IE &= ~perph;
|
|
}
|
|
}
|
|
|